Greg S
-
Posts
2 -
Joined
-
Last visited
Everything posted by Greg S
-
So I got it all sealed up and fixed. Now my problem is that the steel tube from the front side of the oil cooler down to the oil filer housing leaks. I put new rubber rings in on both sides also. It seems like it doesn’t fit right. Like it’s tight. I did some research and the older mp8 had dowels pins on the oil filter housing. But mine doesn’t have that. If i loosen the oil filter housing bolts, will it have any play to adjust it to make it work? I pulled it back apart and resealed it. Same problem. Any thoughts?
-
The gasket that is between the cover that hold the oil cooler and the block is leaking on my 2013 cxu 613 Mack with a mp8. I watched like 4 videos on YouTube, they were all leaking in the exact same spot as mine. Apparently it’s a common problem . When I put a new gasket in, do I use any kind of sealant on it? I will take any tips or tricks. Thanks
BMT Forum Logo
