peteguy

Do u know where the satellite radio wire is run to as I want to keep my sirius

I have a 2013 pinnacle chu613 and I want to swap premium radio for a double din head unit. I am wondering if there is adapters to use to keep the factory sirius and integrated hands free speaker

I have 2013 chu 613 with 505 mp8 motor 13800km. About 1000km ago i noticed smoke under load thought brakes, but no not the problem that night checked oil it was down 1 liter so I added a liter next day smoke again but no panic call the dealer they tell me it's typical.so next morning started it and I looked at casing vent it had a bit of oil on it and was smoking immediately. This today still smoking under load.oil temp runs 245 oil pressure between 45 and 62 it bounces a bit have added 4 liters of oil in total.help please

the fan will be quiet until 190 200 then once it hit that temp it runs full time until u stop and even sometimes it will stay running. THere is a tea kettle sound when u accelerate in low gears without the boost so we are thinking possible air to air pipe leak. there i no on and off for the fan clutch it on a relay and the truck cools to i would guess 175 and it still runs.what sensors to check is the thing i read something about the egr sensors could cause it but not sure.truck boosts up to 30 psi under full throttle. I just shut the truck off earlier and heard an airleak its coming from wats called the vpod valve if anyone wouldknow what this is or wat it does it would be great to know i am young and learning.thanks hope thats more info to go on.p.s. it had the latest programming last year before it went off warranty if thats wat u can call it.

I am gonna admit i am not a mack fan but my company purchased a 2005 mack vision caouple years ago and we have problems wondering of someone could help seeing mack saws theres nothing wrong wit it. The truck poors a steady stream of smoke wen under load. the stacks are black, in the morning when u start it up soot comes out of the stacks. The engine fan runs all the time(air clutch) and when the turbo spools it takes atleast 10 seconds.Any help would be apreciated we don't know what to do thanks.