Jump to content

Mack458

Bulldog
  • Posts

    223
  • Joined

  • Last visited

Everything posted by Mack458

  1. Removal, rebuild, and install of 707C for 1965 B95 pumper
  2. From the album: 707C Engine Rebuild

    Truck returned from having firewall, floor, and frame painted.
  3. I am looking for a carburetor for my 1965 B Model pumper. The model number is located on the round brass tag on top of the carburetor. Many thanks, Mark
  4. I am looking for a carburetor for my 1965 B Model Mack pumper. These carburetors have been used on the 707C gasoline engines from the 60's into the 70's. Contact Mark @ mack458@verizon.net or 610-246-3265.
  5. Looking for a set of stainless steel mirror brackets for a 1965 B Model - may accept a set in chrome if in excellent condition.
  6. You can try Olsons Gasket is Washington state. I ordered a complete set of gaskets for my 707C and they of good quality. As it was a fire truck I needed two other small gaskets and they shipped them out @ no cost. http://www.olsonsgaskets.com/
  7. Finishing a rebuild of a 1965 Mack 707C Gas Engine and need to know how any advise on setting the Thrust Buttons on the front gear plate. The engine was completely torn down and reassembled and looking for suggestions as the manual does not address this. Many thanks in advance, Mark
  8. Peter, I would contact the Brillman Company in Va. as they may be able to help you. Check the Mack Museum website - there is a list of vendors for different parts, some electrical. You can aslo call or email the museum as they may know of additional vendors. Pictures may help your cause also. Mark
  9. I have a 1965 B Model with fctory installed P/S that I need to confirm the propoer routing of the hoses. The truck has been apart for a while and I had labeled the routing but it is gone. Need some assistance as the Mack Museum description does not show enough detail. Many thanks in advance!
  10. I have a 1965 B Model with a 707C Gasoline motor and wanted to confirm the proper muffler for the truck. It is a 1000 GPM fire pumper and the current muffler has a 3.5" inlet and a 3" outlet. The muffler body is round and is 38" long. The Mack Museum has provided some drawing but they do not match with what is currently there. Any help would be appreciated.
  11. Contact the Mack Museum in Allentown, Pa. with the truck's serial number. They can provide some hwlp with the origional documents, including the first owner. A lot of fire companies keep the manuals and you may be able to track your's down. Museum will accept any donations as the info is free. Mack458.
  12. Hello everyone, I was able to locate a shop that will manufacture the adapter - Bob's Speedometer @ $150.00 Bob's Speedometer 10123 Bergin, Road Howell, Mi. 48843 800-592-9673 or 810-632-0400
×
×
  • Create New...