hatcity
-
Posts
4,826 -
Joined
-
Last visited
-
Days Won
26
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by hatcity
-
sorry to hear of the passing of your friend
-
welcome. NICE MACK!!!!! we should consider banning you for the FWD pic Yardo would have to be notified
-
can you post a pic? then we can help decifer
-
yep. some days you make a buck, other days you spend ten might want to consider draining axle completely. all those metal shavings will be in the mix and may ruin all your hard work possibly have more fun and do the other side too!
-
if the race looks that good, lets see the bearing
-
to tighten-turn wheel as you tighten nut. keep turning/tightening until no mre movement of wheel. torque to 200. back off one full turn, then torque to 50. back off one quarter turn. wheel should spin freely. Outer nut-as much as you can. I use a five foot pipe. as stated, pour oil over bearings before you put together clean axle end good, and use a bit of RTV to ensure seal
-
just don't have your thumbs inside the wheel
-
saw on facebook he let three trucks go recently one was a Brockway wrecker
-
3 x 3-not too shabby No damage-BONUS!!!
-
Mack CL
hatcity replied to james j neiweem's topic in Antique and Classic Mack Trucks General Discussion
40 acres! -
Welcome aboard!! as Cousin Eddie would say-"she's a beaut Clark"
-
He is VERY dangerous because he doesn't know anything about the weapon.
-
Bringing home another dog
hatcity replied to beatngu's topic in Antique and Classic Mack Trucks General Discussion
check for POSITIVE ground first, else you'll burn everything up -
Truck Ramming Again Recognized as Terrorist Threat
hatcity replied to kscarbel2's topic in Trucking News
Discussed this on the news last night. Also contacting rental trucks (Penske, U-Haul,...) -
Why?
-
Been running Diesel Kleen for quite a while with no problems Primarily for the lubricity factor
-
should disappear on its own UNLESS, something else is wrong
-
Is the fan running all the time? for mine (2001 CX) there is a fuse box in the engine comp. just below the steering column. check the fuse.
-
have the cruise button off-then press the "set" button count the blinks..will be a set of two(3-3, 5-1,...) then let us know the type engine you have and the code
-
Although I will agree with your opinion, we don't see what happened 5 minutes BEFORE the video. trailer had to be pulling him sideways some...and look in the mirror once in a while. (what is behind me is in the past) As I said, what did the 4 wheeler do to get in that situation?
-
I kinda figgered that. Not a big deal though. Just thought I could save some BS.
-
been looking at this post since my truck has a wobble also. have checked everything and signs go to BAD tire. Just got them a short time ago. Had a bad bearing, so replaced. didn't fix, ride height good, no loose tie rods,..... When I replaced the bearings, noticed that several studs would have to be replaced next time. Question-Can I use a small impact hammer to drive studs out while still on truck? or pull hub?
-
oh the wonders of the fast food industry
-
just wait until you have to find that 3rd bolt blind lucky my son is slim. He laid along the frame under the cab to get it
BMT Forum Logo
