hatcity
-
Posts
4,826 -
Joined
-
Last visited
-
Days Won
26
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by hatcity
-
I hope y'all got all yer salt, got some sleep, and fixeded the broke stuff. Looks like the second half of the week will be interesting
-
Dump chickens-Tom takes pics of dump chickens-must be slow in Winfall
-
looks ready to go. Price is not bad did you get the cereal #
-
Should be double frame. Check for rust between the rails republic prolly ran it hard and the got rid of it due to age/ now starting to cost for repairs. Like j martell said-get the model # on the hoist to see actual capacity Nice paint job could be hiding some problems Take it for a ride-engine sounds right, trans shifts right. Then look at it again for oil leaks around engine and rears, and wheel seals -
Thomas-Nope. You can see where the Ford slid into that spot. Looks like he slid on the wet pavement and debris and luckily had the stone piles to stop him/her from getting into the construction site
-
Challenger- even on a 2000 year motor would you need to enter code? reprogram?
-
Get some rest. get broke stuff fixed. Plow snow Repeat as needed
-
Could be a wiring problem If the EUP is bad, you can change yourself. Make sure to get new bolts May have to bar engine over a little as the cam? shaft may be holding it up
-
1) It was on the internet, so you know it's true 2) You saw it on FB, so it was from the source
-
does the P in randyp mean pansy? A/C, music,.... does it have a small fridge to keep you lunch cool? Nice machine there. And with all the goodies for the front As long as clay and compactions met the spec, you should be ok
-
Nice line up of trucks the other group looks like the usual cast of subjects
-
"It won't freeze up" As long it stays dry
-
PB Blaster-lots and lots. If you can remove the keeper bolt? Blaster like hell in there. Then go to post #2 On mine, we used a dump truck hinge pin as the driver. Was just the right diameter
-
Welcome. pitchers. we need pitchers.
-
Truck looks good, very good
-
Glad to have ya back Pilgrim
-
done tin foil hat.bmp
-
I poked my eyes out with an ice pick at the second pic of you. What was the next pic? can't see, can't see
-
Being Superbowl weekend, I was thinking back about all the great commercials. Seem to remember one that featured a MACK COE. Can't recall if a Cruiseliner or MH. Do remember it was a comedian driving one thru all kinds of road hazards, and when reaching destination, the crowd carried the cab/chassis away in celebratory victory. Leaving the driver behind. Anyone remember this? Was it for MACK? or ..
-
That's a tight fit at the steel mill. That bridge called the "Hooter" bridge?
-
I CAN'T BELIEVE NO ONE LIKED THE COLONIAL IN CT.!!!
-
Excellent read. One problem in Atlanta, the day before was like 60 degrees-thus warm ground. When it started snowing the snow melted, then began to freeze as the cold moved in. THEN, everybody hit the roads and packed it in better. Too late to get ahead and salt/brine. Any snow service trucks were just sitting in the road with everyone else. Yes the Mayor and Governor could have done a better job.
-
1998 Mack E-7 E tech
hatcity replied to Manitowelder843's topic in Modern Mack Truck General Discussion
My first thought is fuel related. Old filters. tiny hole in fuel line-sucking air, crap at bottom of tank causing blockage.
BMT Forum Logo
