cgallamore

i think if i could have found an 01 in a junkyard i could have made my 04 a lot more dependable and liter also

heck if it had went out close to home instead of on the road i would have tried to get rid of it

if it would have been a local truck i would have tried to do away with it

it is on the pasenger side attatched to the engine b lock where the computer used to be

i was told that most went out before the 300k and was covered by warranty, and the replacement has all the issues fixed, at least i did not have to replace a bunch of sensers along with it, was told usually the coolant damages a lot of sensers when it goes.

started loosing coolant. found a wet spoot underneith berth found a loose clamp tightend it and thought problem was solved. could not figure out why the over flow tank was allways full and the main tank would be low. coolant use kept increasing got it to fort wayne mack store this morning got it checked out thats when i learned about egr cooler. just passed 300,000 miles so no help from warrenty. is there any other items that are the price of a new car i should be ready to change. it just had a new camshaft installed.

im in mo. do you know where the mo. plant is? i would like to go and take a look.

that makes sence drive it till it throws that code at operating temp. have put 1500 miles on it since and havent seen it again thanks for your time

that is what dads are for, in my case grand dad

have started it 5 or 6 times since that happened and drove about 100 miles this truck set for 3 years before i bought it. ive put about 2 thousand miles on it since i got it.

started my truck after 5 min of idle it was about 40 degrees f i hit the cruse to idle it up by the time it got to 800 rpm check engine lite came on imeditly turned off cruse and checked code 8 4 called dealer, was told injector pump no. 4 cyl. also said it could be a fluke, i shut down restarted and it was still there. after about 2 min. it went off havent seen it since. do you think run it or go ahead and put ip. in. im getting ready to head out west for a week or two and im not real keen on the guy's out west working on a mack. so what do ya think! i never had an ip go out can i limp in like that or is it something that has to be replaced immediatly

found my problem today low coolant sensor. that still does not explain still running after key is turned off.sprayed key hole with lube i think my problem is fixed,between both . thanks mike

i need an owners manual for a 2004 vision cx 613 any help apprecieated

im talking about litt green link below trucknut and above puppy poster on the left

added photo to bmt gallery,went to edit profile,went to edit signature,did not find add photo,found add image,tryed that,didnot work. felling kinda stupid right now and a little embarrased.

i wonder if this could tie in to the key switch problem i've been talking about in the electrical category?

when this happend i had been running the wippers less than 5 min. since then i have run all day with them on at least low for most of the day at least 7hrs. no problems

how do i ad picture that appears above my signnature next to my post? been trying to figure that out for a couple day's. thanks for your time

test

i have some gm lock cylinder lube from one of their recalls i'll try it. just curios was the truck you tried this on a late model? computer truck? thanks for your help.

all fluids rite on full,

about a month ago i turned off the key and the engine kept running i checked my gauges,all went to zero that usually do with key in off position,turned it back on gauges went to where they should,waited 20 seconds or so tried it again, it shut down normally. thought it was just a fluke.last nite i started it,watched gauges oil pressure came up to normal, like normal,after 10 or 15 seconds engine died, imediatly checked gauges,they were as if key was turned off, there was a check engine lite on, dont know why i did this, stupid i guess!! instead of checking the code i turned the key off and restarted the engine, and every thing worked fine. do you think i should change the ignition switch? or wait and see if it will do this again, and try to get the code. this truck sat on the dealers lot for 3 years, if that makes a difference? (you can't fix stupid.)