Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,344

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    Could be water, from bottom of water pump to compressor. terry
  2. terry
    Just keeps a sloppy operator from bouncing rocks of the top of cab, they will just land on the hood!😂 terry
  3. terry
    if you are thinking of any other series transmission you will have to change rear ends to reach a reasonable road speed. terry
  4. terry
    seats look awsum!! 👍 terry Infact the whole truck does.
  5. terry
    no a/c on that truck, and that is no 80.000 it is a 38.00 or 44.000 at the most. terry
  6. terry
    Should be a good trouble free truck!!👍 terry
  7. terry
    bullet proof combination👍 terry
  8. terry
    I have seen them engines with a bunch of blow by and run for ever. terry
  9. terry
    they should be on the park and headlight, as far as the plastic bottle, may have been part of a alcohol evaporator kit that put alcohol in your air brakes to help prevent freeze ups. terry
  10. terry
    every cat or cummins engines i have seen in R models was in the R 700 series trucks. i don't think there is enough room, in a 600 series. terry
  11. terry
    surgery must have went good mike? terry
  12. terry
    As far as i am concerned the best trans mack ever built was the overdrive 12 spd, i put one in a DM with 4.17 rears, best combo ever, and it was a runner too. terry
  13. terry
    very trouble free set up, but not a good transmission for a pup, to wide of gear ratios. but they were used for alot of years. terry
  14. terry
    Yeah that should be fine for a ground to the frame. also need a good ground from frame to cab. terry
  15. terry
    Very good patchwork on the floor, will look real good with some paint on them. your doing some real nice work there. 👍 terry
  16. terry
    can give you some problems without that ground terry
  17. terry
    That is going to be to nice to put on the road!! 👍 terry
  18. terry

    20K front axle

    terry replied to ws721's topic in Parts for Sale

    Can't open any of the pics, wants you to open a google account. terry
  19. terry
    But you also have figure out how to have the hood float above the cowl, so hood and cowl don't rub each other. terry
  20. terry
    The three filters is a ESI engine, has a deeper pan and more oil capacity for extended oil changes. a rs600l could be an aluminum frame, also has light weight components such as spring hangers and other aluminum components. terry
  21. terry
    Wonder what springs if not camel back? terry
  22. terry
    I would trust an older well maintained truck before these newer ones with all the emission junk. terry
  23. terry
    Awsum looking truck! 👍 terry
  24. terry
    You might have a set of bearings and oil pump put in it, and run the balls off it!!
  25. terry
    Says you have to log on to see, your other pics you don't have to. terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...