Jump to content

terry

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    2,375

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by terry

  1. terry
    By the time you add up just a little wear on the inner cam, peanuts, and outer cam themselves, can be alot more than you realize. Terry
  2. terry
    That 70 DM i had that early miter box on the steering gear box. Terry
  3. terry
    alot of people have a different definition of what a rebuilt consists of! Terry
  4. terry
    Probably a TRD 720 which is a overdrive duplex, but if it is a 722 not sure what that last 2 means, and if it is a 2 then it is a direct trans. terry
  5. terry
    I once owned a 70 DM with the scania with a automatic trans. Was a ex mixer truck. Terry it was also a DM 400, 487 model
  6. terry
    could there be a small difference on the turbo fins? And the inside of the housings ? Would fit one way with to much clearance and the other way fins are rubbing the housing? Terry
  7. terry
    Definitely has to be timed right, i put u joints in a steering shaft on a DM, it would almost bind up till i changed the timing on them. Terry
  8. terry
    that is a single countershaft transmission case, duplex, tri, or quadraplex. Terry
  9. terry
    Oil pressure numbers don’t sound bad, how many miles on bearings and oil pump? Terry
  10. terry
    No other yards to check with? Terry
  11. terry
    Key switch? Terry
  12. terry
    Maybe you can still find another hood somewhere?🤷‍♀️. Terry
  13. terry
    Two cars i had about 50 years ago, first one was a 1970 nova SS 396 buckets,four speed, and a 1965 chevy impala SS 396, with a bench seat, four speed, first year of the 396. terry
  14. terry
    I know a guy years ago that swore noise was his quad trans, took it out, had it rebuilt and yeah same noise, it was front rear end! Terry
  15. terry
    Anybody know what it brought? Terry
  16. terry
    That’s a real long transmission for a B model!😁. Terry
  17. terry
    Never heard of a 2070 behind a 350? Terry thought the maxidyne was only 300 hp.
  18. terry
    Sure alot different than the old simple two valve mack engine! they would run forever with a little maintenence. terry
  19. terry
    They call that a castle nut, supposed to have a cotter pin when castle nut aligns up with the hole on the knuckle. Terry
  20. terry
    So what did you use for axles on rear end pumpkin swap? Terry.
  21. terry
    Just fill filters completely up, and pump primer till hard, should start, might miss for a few seconds but should clear up. Terry
  22. terry
    The trdl1070 would work good behind a 237 or 285, but the X107 six speed would not be good behind a 350, to much lugging for that engine. Terry
  23. terry
    What model is the dump truck? Chances are the 75 is just a x107 six speed which will not work good with a 350 engine, need to check rear ratios to see if there the same. Terry
  24. terry
    Is this a single axle, or tandem, single axle on the older Mack’s can be front or top mounted? Terry
  25. terry
    I would say the R 614 is the ratio. Terry

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...