e9500v8
-
Posts
232 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by e9500v8
-
I don't have a college education where is OKC??
-
It be unhooked!!
-
Who knows someone good to rebuild these pumps and get a lot out of them? I have adjusted mine to the max and it is still not enough!! I put one of Dale Francis turbos on he says it should make 50-55 pounds and it makes 33 !! I have checked for boost leaks in intercooler and have none! Truck doesn't smoke much with this turbo so it tells me it is not getting enough to eat!!
-
It also could be the overflow valve I will explain where it is after you check the seats in transfer pump
-
Take the primer pump out and right under it is a plastic seat could be wooden . When you get primer out see if it is in pieces if not take it out and inspect it !! There is one in both holes one under primer pump and one under nut beside primer pump check both of them ! Let me know what you find bet that is your problem!!
-
Want the one with the humps on it . In the states we have tons of the ones like you have on your duck!
-
If you have another one I would love to buy it I just posted a want add two days ago wanting one message me if you do thanks Allen
-
I want one of those Aussie visors that have mack logo in the middle of them
-
Don't think to hard ! I thought I seen some smoke! I kinda need to know I'm supposed to take these things up to him Saturday !
-
You want to sell your set??
-
-
Got one coming he is also going to redo my manifolds
-
Well puff limiter has been gone. Was it a holset that Dale sold you??
-
I have 1988 super dog with 500 v8 and want to put a bigger turbo on it. I have seen guys talk about putting holsets on them and I think that is the way I want to go. I want 40 pounds of boost I run truck everyday I don't pull it !! I just want to know who to contact for a mean turbo !!
-
R model project?
e9500v8 replied to smokin joe's topic in Antique and Classic Mack Trucks General Discussion
I drive the same truck and Had the same thoughts about a month ago!! -
It is from your truck walking (axles are moving left and right opposite each other) your bushings are wore out it is cheapest to get a whole new saddles with new bushing in it and put her on. Make sure you get u bolts tight they are supposed to be 1800 ft/lbs!
-
Those motors have dry sleeves the coolant will not go in the oil pan unless through the head gasket!!! The v8 and all e7 and newer motors are only ones with wet sleeves!!! Does your motor have the cooler box on the side of the left side of the motor? If so does it have water lines going into it? I myself think someone got it hot and cracked the head It is def not a liner they are probly fine.
-
Sounds like you got a loose valve I would def run the valves!
-
E9 Dyno Time
e9500v8 replied to mack mhe9's topic in Antique and Classic Mack Trucks General Discussion
Thats when they are just starting to run good! Have fun! Dont you just feel like a big kid driving it! -
The little line from air govener to air dryer could be clogged I have ran into that before just unhook both ends and blow through it with shop air see what comes out I bet that is your problem
-
-
Well it is def not that quick release but I did do some more fooling around and when you have the trailer brakes realesed they dont stay on so that tells me that the tp valve is good but the air is releasing through the trailer service valve that is not right. What valve does it release through when you are bobtail the r12 valves and the foot valve right .I think I have a bad new foot valve maybe I am wrong I have been before
-
Thanks so much I will have to check that out tonight I know right where it is so it wont take long to check it out.Thank you
-
I do have a wiring diagram but it is not a wiring problem it is in the air system for sure!!
-
I know it is the right switch I have owned this truck since it was new and may have replaced it a few times but the problem started all the sudden. The trolly bar is not pulled down .If I release the air at the light switch they dont come back on so I know that air is not leaking over to the service side in a chamber or valve..
BMT Forum Logo
