Jump to content

MACKS

Pedigreed Bulldog
  • Posts

    1,681
  • Joined

  • Last visited

Everything posted by MACKS

  1. 58 rears? Are u on Long Island?
  2. Why do they even make saddles like that,I never even knew that type existed?
  3. As long as your not driving on no trucking roads I don’t see how they can harass you,it’s still mostly a free country to drive where u want..🤷‍♂️😡
  4. I should add that I was informed this certificate is worth 20 large..🤷‍♂️😳
  5. I’m in NY and have a down state grandfathered permit for 79000 on four axle but I still can’t exceed axle or tire/rim ratings or gvw weight ratings..
  6. There should be zero movement or twisting of the springs,if u can back the nuts off and oil the threads u can re torque other wise new u bolts..
  7. Well,hope your gonna be ok and feel better…
  8. MACKS

    No heat

    Do u have 12 volts going to the blower motor?
  9. I only owned one truck with a 237/6 speed,that was one sweet running truck..
  10. What engine,why do u have to remove the pump,if u do don’t move anything,engine or pump..
  11. The drag links on my cl are not adjustable,one end is a screw in type so that part may be replaceable the front end is part of the bar,very pricy at 550 each side,it was determined mine were good,thankfully..
  12. Looks like 24” tube type rubber,good thing the rear tires are in good shape $$$..
  13. Looks pretty darn nice for 30 bucks,did u paint it ?
  14. 1450..
  15. Yes sir,2000,still original even the wheels just had them worked on and chromed..
  16. I like to get out early Sunday mornings while there all sleeping in..
  17. Three inch free travel in the steering wheel isn’t enough to cause the the truck to wander back n forth,could be the tires if everything else checks out..
  18. No battery or electric needed,just push the air knob in an off she goes,the sound is awesome…
  19. Update,I sent Barry a message..
  20. Would anybody happen to have the part numbers for the two drag links on a 1996 Mack cl,20000 front axle,or where can I find Barry’s e-Mail,Thanks
  21. Just a few weeks ago my wife caught me going out with my battery operated water pick..lol after soaking the core with spray nine I used the water pick to wash it all out,worked great,u need to straighten out the fins also if there bent over,they make a comb for just that,as said above huge difference..
  22. Pull the sending unit out,measure the depth of your tank let’s say it’s 30 inches deep,set the arm and the float to when straight out its 15 inches from the bottom and top of tank_
  23. It’s nice to have an accurate fuel gauge but most drivers don’t trust them anyway,it sucks running out of fuel..
  24. I never had them on any off my trucks,all 58 rears,not sure why tho🤷‍♂️
  25. The valve shuts off the water to the heater core so u don’t sweat to death during the summer,if u have ac it’s mandatory to shut it off..
×
×
  • Create New...