Jump to content

MACKS

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,681

  • Joined

  • Last visited

 Content Type 

Everything posted by MACKS

  1. MACKS
    This was my 83 RD with the hood scoop,it had the 300+ with 12 speed,an awesome work truck...
  2. MACKS
    I used to own a 1963 Diamond T,the cab was factory pink in and out,strange color for a garbage truck...
  3. MACKS
    That truck is beautiful,makes me miss mine,still have a bumper for ya if you need it...
  4. MACKS
    I flip the splitter when in neutral,change the air filter on the trans see if that helps..
  5. MACKS
    Yep he went under a railroad bridge that was to low,the bus was coming the other way and after impact with the bridge he hit the bus head on,there was another picture in the paper showed the drum laying on the ground,truck belonged to Nicola
  6. MACKS
    I'm talking about trucks,it would be best to start a new thread to discuss your balls,ops I meant no balls...
  7. MACKS
    Same setup I owned and drove for many years,the 250 is a great running engine nice and smooth but no balls at all,that's where the quad box comes in,once you teach yourself how to shift and really master it the truck will move along very well except pulling a long steep grade,good luck and have fun...s
  8. MACKS
    Thanks Rob,gotta wait till tomorrow to get the full story,I'm sure someone on here will recognize that mixer from the colors..
  9. MACKS
    I only wanted one picture,can someone fix it?
  10. MACKS
    According to the story the cement truck was out of control and crashed in the school bus killing the driver of the bus and injuring 6 kids,could of been a lot worse,this was on oyster bay rd in Nassau county Long Island.Scary chit..
  11. MACKS
    I think we made up his mind for him..lol
  12. MACKS
    Chrome hood latches would look sharp...
  13. MACKS
    Drill them out or grind of the nuts from underneath,it will be worth the time and effort...
  14. MACKS
    I would take the hooks off so you can paint under them and reinstall with new stainless steel bolts,just my two cents!
  15. MACKS
    Adjust in firing order on tdc compression stroke.
  16. MACKS
    Forget about the oven and get one of these smokers,only about 60 bucks at home dopey or blows...
  17. MACKS
    6.34 would be slow even with an overdrive trans,someone on here might be able to figure it out for you.
  18. MACKS
    Are you living in the stone age,as a hunter I have seen many wabbits infected with parasites,the most common being tape worms,so if Buster eats bunny with tape worm then Buster gets tape worm,Not Good...
  19. MACKS
    Raw bunny's are not good for Dozer,they need to be cooked first if possible...
  20. MACKS
    I only mounted one on an RD and I used self tapping sheet metal screws with an ample amount of silicone to keep out any rain water...
  21. MACKS
    We used to run trucks with farm plates on them,no nys insp was required but the truck had to run on a designated route,that was many years back so might be different now...
  22. MACKS
    It is a bolt and when you remove it and the washer behind it the slack adj should slide off,to replace the bushings you will have to take the s cam out and to do that you have to remove the drums,I would leave the bushings till you replace the brake shoes..
  23. MACKS
    I believe he's talking about 2010 year,is that right?
  24. MACKS
    Guess it's good thing I cant afford a new Mack,but never had any issues with the older ones,work them hard day after day on and off road,routine maintenance is all they needed.
  25. MACKS
    I think it's safe to say that you better have good brakes and have them adjusted properly and have good tires and tight steering and no broken springs or cracked windshield ect,ect,ect,or you will be put out of service just like any one else,antique or not...

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...