Jump to content

Superdog

BMT Benefactor
  • Posts

    6,839
  • Joined

  • Last visited

  • Days Won

    149

Everything posted by Superdog

  1. I was going to say Hennis,but I knew that wasn't quite right,Thanks Al. do you have any pics of it.?
  2. This original CJ belongs to Barton Burch in Rochelle,IL There was also a restored green CH tractor at the ATHS convention in Milwaukee,can't remember who had it but the also had a B615,I have hard pics of it but they are put away. Also think there was a restored one at Bob Theimer's auction
  3. looks like a damn decent truck,I'd noticed on Ebay,but never more than glanced out it until now,didn't realize it was in Iowa.
  4. E7's have wet sleeves. Most of the Visions you will find will have vendor trans. and rears,as they were basically highway tractors,Mack pushed the vendor components to be more competitve with off breed trucks.
  5. If I had that trailer,I'd really be in trouble.
  6. Looking thru some files,found these pics from a couple years ago when I sold some trucks to Mander's Diesel. These are super guys to deal with.
  7. Should be stamped on the carrier ,start scraping grease,you'll find it.
  8. I don't know what it would cost to fix,but you can buy a good used for $1000 about anywhere,if clutch is noisy you'll want to pull the trans. anyway. The only possibilty of it being a factory single axle if it was sent to mod center after build and changed,It used to happen. I have a B61ST that was done too,They don't change the VIN since it's already been issued.
  9. Merry Christmas everybody. Anybody that wants a Mike Harbison Trucking / Women of Winfall calender to decorate their dashboard,send me a SASE and I'll drop you one in the mail. Box 154,Morning Sun,IA 52640.
  10. wow,I wonder if there's a typo on that somewhere,,definitely need a pic of the truck.,the 78K part throws me off,the rest,WSK700744 could very well mean it was a WS700 Cruiseliner glider kit.
  11. I'm going to say the firewall starter was original.
  12. That looks like a nice one,the engine will most likely be the ENDT676 "300 series"Maxidyne rated at 283 hp,good combo with the 6 speed and plenty of power for a single axle.
  13. They were used on plaques given to dealers for making sales quotas,etc.
  14. worse part about taking them off a used hood,99 times out of 100 either the studs break off or break out of the plastic housing,been there and done that more than once.
  15. pretty sure unless it's been replaced it should be a ENDT673,nice find.
  16. I got new LED ones from Iowa 80,they were $65 or $70 apiece,you can get them with either all amber lens' or red on the back.,they are pretty close in looks to the OEM lights,chrome trim and a side marker that lights up.
×
×
  • Create New...