Jump to content

bulldogg

Puppy Poster
  • Posts

    14
  • Joined

  • Last visited

Profile Fields

  • Interests
    R models V8 macks

bulldogg's Achievements

Apprentice

Apprentice (3/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

1

Reputation

  1. WOULD LIKE TO TALK ABOUT YOUR FIRE TRUCK

  2. Any ideas were the CF aerialscopes went to????
  3. BullDog I looked for your HY43CC6113 and I don't have one, I get PTO's all the time and I will keep looking

    fastwolff

  4. Well after hours of trying to figure out this problem, Found out the Clamp holding the turbo togather was missing. Made new clamp from two older clamps, It stopped the air leak and The truck FLYS now. Runs like a rocket. Thanks again for all replys.
  5. I changed the filters already, Soo I will try to free the fan on turbine. With the truck sitting for years I guess this hopefully is the problem.
  6. d-side
  7. Ok the pics as follows, Turbo on pass side of truck, looks like turbine fan on drivers side where the gaskets bad.
  8. [ will post more pics today. Im not understanding how to get into the turbine to try to move it? The truckwas sitting almost 4 years without being run hard. I just figured the torn cover was the problem, From what I can tell there is a filter on the inside of drivers side where my first pic was taken I was told its the intercooler filter. But maby I was told wrong. Thanks again, also when driving the truck, The pyrometer reads very warm when under a load. it exceeds the normal temp. 1300 degrees. I always let off before it reaches that high temp. ken
  9. ok found out the truck is boosting, but does not make the normal sound a 285 is known for. When it boosts theres a large air leaking sound coming from this cover. Is that the cooling air?? It doesent make the siren type sound the 285 normally makes when boosting and slowing down. Would this leak prevent that sound?? Ive found a place called Rubber world in my area thats making a replacement for me. Thanks for all help ken
  10. what i need
  11. would the mack be palmyra pa ?? The filler cap is very hard to see on my 81 with the 285 motor like yours. Its very hard to add oil, unless u use a long funnel. Must have small hands to reach in there to open the cap too. Its a real pain. Ken
  12. 22 teeth on pto gear. I can email u a detailed pic if that would help. Thanks again
  13. 5speed would one off a 6 work???
  14. [ ANYONE??? I am having no luck.
  15. I have a 1981 285 maxidyne engine that I need help with. I am looking for the rubber cover/gasket that connects from the intercooler to the intercooler filter Box. Its a rubber cover, Mines dry rotted and is preventing the turbo from boosting. I tryed mack and they dont have this. Any leads on a junk yard or?? Its off a 686 CF mack. Thanks
×
×
  • Create New...