Jump to content

j hancock

BMT Benefactor
 View Profile  See their activity

  • Posts

    13,372

  • Joined

  • Days Won

    524

 Content Type 

Everything posted by j hancock

  1. j hancock
    Tri State Kenworth Enfield, CT is two towns away from Springfield, MA right on Interstate 91. http://www.tristatekw.com/
  2. j hancock
    PG Adams does straight rail frames so you have to use the OEM Mack "front" section for R and RW. The link shows can and can not do. http://media.wix.com/ugd/4e46da_7f9e250e75eb447da5f0561afbe9c968.pdf
  3. j hancock
    Did they find the sink hole next to the storm drain that needed to be repaired?
  4. j hancock
    Damn! Fighting words! I was thinking more like this. Got to be gentle with oversize jobs.
  5. j hancock
    Do they have one for an automatic? Never mind......
  6. j hancock
    Finding a real nice sleeper will be the first trick. Depending on what you find, making mounts won't too difficult. A donor hood may be the best bet for bringing the headlights back to stock depending on how much they did putting in the Superliner lights.
  7. j hancock
    Should be OK.
  8. j hancock
    Nice tractor! You did good at the auction and nice lights!
  9. j hancock
    Yes, good question.....
  10. j hancock
    Threads http://www.bigmacktrucks.com/topic/34154-superliner-hood-stainless-steel-stone-guards/#comment-225318 http://www.bigmacktrucks.com/topic/32862-superliner-stainless-fender-deflectors/#comment-207484
  11. j hancock
    The rims fit! Good catch on the clamps/wedges/lugs. The spacer should be the same width side to side and all the lugs should be the same on both sides as well. There should be cast numbers on the wedges to see what you have. Here is some numbers if you get in a bind. Check page 4-44 thru 4-51. http://truckhub.us/yahoo_site_admin/assets/docs/Euclid100DWheelAttachingPartsX-Ref.96161249.pdf
  12. j hancock
    Disc brake calipers need to "float" so they self center on the rotor. Sounds like the caliper has seized to the caliper bracket. Depending on the brand of your system the slide can be lubricated using caliper grease or anti seize compound. Bendix recommends white grease on their guide pins. http://www.cbsparts.ca/admin/bulletins/SD-23-7541_US_003 rfs.pdf
  13. j hancock
    A couple of Zip ties will clean that right up.
  14. j hancock
    My "talking" car computer will be loaded with a long list of swear words and derogatory phrases.
  15. j hancock
    What are the brakes doing or not doing?
  16. j hancock
    If you can train them, they could help during fall harvest.
  17. j hancock
  18. j hancock
    Start looking for interior pieces because lots of them are off the books at Mack. If you are going to stretch it out, get an air ride cutoff and you should be able to skip the air ride cab.
  19. j hancock
    At least one lap at Daytona and Talladega each year ARE like that. The BIG ONE!
  20. j hancock
    Well.... Joie Chitwood III is the president of Daytona International Speedway and COO of ISC. Who would have thunk it. http://www.daytonainternationalspeedway.com/Articles/2016/04/International-Speedway-Corporation-Names-New-Chief-Operating-Officer-Joie-Chitwood-III.aspx Some of the video looks like folks trying to park at Walmart during Christmas!
  21. j hancock
    Sorry, I don't have part numbers for the steel.
  22. j hancock
    Steel was more widely used compared to the aluminum. Should be able find a match from a B61 donor truck.
  23. j hancock
    Interesting. If you can post a picture of the VIN plate and the trucks, that would be great.
  24. j hancock
    Nice score! Almost time for another shipping container.
  25. j hancock
    We talked about that truck a little while ago in this thread. http://www.bigmacktrucks.com/topic/46822-new-f-model-glider-kit-powered/

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...