j hancock

Virgo Fleet probably has them and they are located in Brooklyn, NY.

Welcome! Since it is winter, I can't tell you to watch out for the deep end of the pool. So, beware of thin ice instead.

Yup, same guy. The milk truck is still waiting patiently for me to get started on it.

Sometimes it is, but right now it is in Canada for storage. I have a couple future restoration E models here.

Construction work is going on inside Borders. Haven't heard who is going in there and no rumors on the old CC space.

I would like some retro trucks! The way things are going with the guv'ment, you could have some interesting conversations with the EPA and federal DOT. Probably better to do some rebuilding/restoring versus manufacturing.

I was over there stocking up on duct tape.

F model (50.5" BBC) CA 38 DM6116S CA 361 R model +3 cab CA 49 R model flat back right hand drive CAR 36 RW Superliner CA 494 W model CA 20 H60-61 CAS 23

Case and Komatsu.

Mack and Rockwell King Pin Set Mack and Rockwell king pin set information from a 1984 Mack Fax. Please note that there are early and late FA 517 axles. Late FA 517 utilize a 7.4" pin with a bottom bushing and top needle bearing and the replacement part is 301 SQ 46B. Early FA 517 axles have a 7.97" pin with bushings top and bottom. A replacement is not available from Mack. Rare Parts (800) 621-2005 has a kit for this axle with RP 30395. Author j hancock Category Antique & Classic Mack Info Submitted 02/16/2014 12:12 PM Updated 04/30/2016 10:26 PM

I am in Swanzey so I have a few local pictures. The R went for a boat ride? Was there an issue like a bad frame? That always looked super sweet and really liked the colors! I think I saw your green rig yesterday afternoon working at 101 and Lower Main St.

Is it the one where you get to pick your favorite burger?

Hmmmm.....discreet. 10-4 on that. Some rules instructions from the cruise director on this yacht are not always adhered to. Just saying.

That's a fun place to check out.

Nah. That can't be. There two knobs on that version.

Yup....Randy showing off his wood again.

Yummmy! Some pucker factor there!

WHAT kind of GPS was he using???

Welcome! A hard hat and boots are mandatory for lurkers.

Was it the USA driver from the video?

Who owns it? I just took the picture at Carr's as I was heading to Nashua. Where did Ricky Cummings trucks go?

Is the USA driver now at Swift?

Just a little???

Ahhh......winter. OD, have you had to put irons on at all this winter?