Jump to content

j hancock

BMT Benefactor
  • Posts

    13,372
  • Joined

  • Days Won

    524

Everything posted by j hancock

  1. Hopefully you won't need any shots for your indiscretion.
  2. Not sure on the synthetic. Might be OK. The steel rod may be rusted at the mounting ferrule where it passes through the dash. Use sparingly and see if it gains you anything. The switch housing and knob are an early plastic or Bakelite. No need to melt it.
  3. Stay safe everyone. I am staying home and Relax! Nice Pic! Clearly part of Randy's "Grab Some Ass" campaign...
  4. That style of switch is original. The pull action of the rod makes the contacts rotate in the housing. I have an ignition switch that is the same style out of an E model fire truck. Also, I think A, E, and L headlight switches were all that same style.
  5. I type too slowly to chat.. Need a gas pedal on the computer.
  6. With the axle number, the correct pin kit can be determined. The axle number is stamped on the pass. side facing front between the king pin and the spring. With the pump number, you can call some suppliers and run the numbers for cost. Called around on a rebuild and found a super deal with warr. from a good shop.
  7. Pass the Grey Poupon.... I will need to fuel up the helicopter to visit LI and then head to PA/OH.
  8. B sleepers are sort of scarce. Plan on fixing what you have.
  9. The Monfort "Lane".
  10. If I am holding someone's ass, it will be female.
  11. No connection. Have fun! http://newhaven.craigslist.org/ctd/4261926869.html
  12. OK! Time to dust off the ski equipment.
  13. Classic trucks never go out of style.
  14. Sounds nasty. Rest up and try to do what drs. say for both Mike and DigDug.
×
×
  • Create New...