Jump to content

j hancock

BMT Benefactor
 View Profile  See their activity

  • Posts

    13,372

  • Joined

  • Days Won

    524

 Content Type 

Everything posted by j hancock

  1. j hancock
    Featured dual chain drive. Air ride suspension was not an option...
  2. j hancock
    Sorry for the poor quality scan. Photo courtesy of the ATHS Show Time book.
  3. j hancock
    Mmmmm... carbide chopper.
  4. j hancock
    Nice air cleaner panel!
  5. j hancock
    No bike ride..... no fishing.... Hopefully you have enough strength to lift a beer?
  6. j hancock
    Pretty sure on the A, the VIN plate is located on the seat bolster passenger side.
  7. j hancock
    BAD DOG was doing them. Here is a link. Bores Mfg. made them back in the day. https://www.bigmacktrucks.com/topic/34154-superliner-hood-stainless-steel-stone-guards/
  8. j hancock
    It is an A model, 40 is the size/weight, X is extreme service chassis and it was the 8798 unit built. Records indicate that total production was 7666 "40's" built between 1950-1953. So it is interesting that your VIN shows 9799. Mack VINs start at 1001. Could you post a picture of the VIN plate?
  9. j hancock
    Some heavy iron shown at Worcester Sand and Gravel 2013.
  10. j hancock
    It was rare. It was one of one!
  11. j hancock
    Good looking rig!
  12. j hancock
    This beauty on display at the Memorial Park in 2013.
  13. j hancock
    Like the orange RW!
  14. j hancock
    Seen trucks with none or both sides or just driver's side. I asked Dave Igou about his E9 years ago and only having the left Econdyne emblem. It was the way it was built.
  15. j hancock
    Shutters sounds like a good project for this winter.
  16. j hancock
    Looks much Better!
  17. j hancock
    If you can get the Rockwell numbers off the axle, a heavy duty parts house should be able to get you some hubs and associated bits and pieces.
  18. j hancock
    Pretty much all DM's are heavy but this one features a 23,000 lb front axle with two lugs per spoke.
  19. j hancock
    Don't think I would have sold that! A little spread in the camelback probably works pretty good in the field.
  20. j hancock
    Very KooL flopper! You will have fun with that 41! Kaase sure has made the Boss 9 his pet project.
  21. j hancock
    Sounds good Bob! This one is based in Reno. Might be the same rig? Scanned picture out of ATHS Show Time.
  22. j hancock
    Powered by an Iron Lung 275 Cummins and hooked to a tri-axle Red River Trailer in 2002.
  23. j hancock
    Some part numbers for you starting on pg. 192 https://www.donaldson.com/content/dam/donaldson/engine-hydraulics-bulk/catalogs/air-intake/north-america/F110027-ENG/accessories/Air-Intake-Accessories.pdf
  24. j hancock
    The two locations for the VIN are behind the right front tire on the frame and the door plate.
  25. j hancock
    And 52 years ago, the Mack B model production run was ended. The last B model is now owned by Matt Pfahl.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...