smorse54

That's a Midland inversion valve. not familiar with the new one. The inversion valve controls the spring brakes and helps to stop you if you lose air in primary system.I would just eliminate it, they quit putting these on back at least 25 years ago. Steve

Looks great Travis! I'll sure be able to spot you now. I won't have to stare at every Western Star I meet to see if it's you.Can't wait to get a close look at it. Steve

Being an 82 there should be only 2 wires, the positive goes to the hot side of the starter solenoid and negative grounds to the block.I haven't seen any 350's with 24 volt start and series parallel switches.If so its a different game entirely. On the 2 speed is this a Fuller Roadranger transmission?If so it sounds like the slave valve is sicking. You can remove it and free it up.It's located on the left side and all the hoses go into it. Steve

That sounds fair. Keep me posted as I also plan to attend this year. Thanks, Steve

I'm looking for a nice stainless clad aluminum bumper for a RW. With or without fog light cutouts.This is for a Superliner 2. Thanks,Steve

Yes, I checked and have everything.These are real Mack, in unopened bags. (2) 5027-0702 upper and lower seals (2) 449GC27 side seals

I think I have all the gaskets. I will check Friday and let you know. Steve

If it has a stamped steel timing cover use a gasket. If it has a cast aluminum cover silicone. Being a 1988 I would assume it is a four valve with a cast cover. Steve

Yes, most everything is still available. PM me if you are interested. Thanks, Steve

Hi Don, it sure does turn heads. Nice truck. What's with the Concrete Delivery trailers? I tried calling them several times last week,was looking to do local for the summer. No answer. Friday afternoon I met at least 6 of these heading west on 90 in Ohio and PA pulled by Kuhnle trucks. Must be out of business? See ya Don, Steve

I've got alot of parts for an E-6 2 valve: Injection pump and injectors(Ambac PLM with barstock injector nozzles) oil pan 34 quart only been on engine less than 2 years Dynatard rockers Dynatard cam and lifters vickers p.s. pump good Bendix air comp. Exhaust manifold with turbo Lots of misc. parts.PM me with your needs and offers. Thanks, Steve

finally got the Brockway pics I promised

I get to Chester WV at least twice a week but that ass doesn't look familiar. Do you ever notice the two Brockways on the right as you;re goinh west on 30 over the bridge? Someday when I have time to kill I'll walk from the Sonoco and check them out and pics of course. Steve

I sure wouldn't do it. That's way too much for what that motor was designed for. steve

I've got a nice used E-6 or early E-7 oil pan.This is the 28 or 32 quart pan. Was new 3 years ago, no rust or damage.$200 plus cost of shipping. thanks, Steve