Jump to content

mowerman

BMT VIP
 View Profile  See their activity

  • Posts

    18,331

  • Joined

  • Last visited

  • Days Won

    117

 Content Type 

Everything posted by mowerman

  1. mowerman
    Last 237 I did was 1200 for everything but that was 1986 I just remember 80 bucks a hole… sleeve piston, rings ,and wrist pin
  2. mowerman
    Not sure what’s happening. I just got a brand new phone iPhone 15. It should be working like a champ.
  3. mowerman
    I’ve heard there’s aftermarket kits, but I haven’t seen anything on here about any of them. Good luck.
  4. mowerman
    Wow !!!!!!!!!thanks bud
  5. mowerman
    Can’t open
  6. mowerman
    I’m fixing on chopping a hole in the inner fender and drilling out the rivets and pulling it out I am hell-bent on saving that thing ha ha I’m sure you fellows would get it
  7. mowerman
    Call that SOB is driving me nuts. Next plan is to remove the plate and continue with drilling. Rivet the plate back in place after I get it completely drilled out all the time I’ve spent trying to remove the bolts seems the right thing to do
  8. mowerman
    Don’t have it but it’s pretty much the same color as military green. I’m sure somebody will reply with the correct answer. I have a gallon of it but I’m sure that’s not going to do you any good in Reno good luck.
  9. mowerman
    Excellent, thanks for that
  10. mowerman
    No thier almost flush with the fiberglass barely enough to put vice grips on and twist. They’re not budging running out of choices. Ha ha the drill there almost worked.
  11. mowerman
    Wow, that’s some nice neat work
  12. mowerman
    You betcha bud I’ve been trying to do a little bit each weekend, but I owe it all to h67 and Matt I really didn’t do anything worth bragging this weekend, but I did get around to finally pulling that ugly ass bent up bumper off but I am way overtired of looking at
  13. mowerman
    Yes, and what I remember they also use those F model day cabs maybe I’m thinking of Carolina I’m not even that old my memory is already collapsing
  14. mowerman

    photo test

    mowerman replied to jdazimuth's topic in Test Forum

    IMG_2671.mov Well, that one went through it wasn’t anything special. I was just using it as a test.
  15. mowerman
    Unfortunately, they were both starter drills with really small holes. There’s not much I can do with them.
  16. mowerman
    30 years ago i hadda chevy flatbed just like that one it was also green.....sold it to an indian chick that drove it to texas...bob
  17. mowerman
    i usually wear a name tag,when i go out there,,,its almays a swinging time usually runs me around 2 Gs for all the reservations and yes tom im fixing on going to macungie i was planning on watts....also me and the misses both agreed last magic potion was the absolute best...bob
  18. mowerman
    atleast i got all the right side catch bolts out by taking vlads advice and taking my time spraying them and winding them in and out easy several times...bob
  19. mowerman
    ya like i mentioned they reallydont have a whole lotta build up for its age,im still furious over those broken drill bits.........had one of the bolts completely drilled though,,,,,but now i cant do shit without pulling that plate out,,,guess i shouldnt be too upset im pretty much reworking most of the fiberglass anyway,.that nose is so rough,,whats one more issue?????lol.atleast it will be right!!!!!!!!..bob
  20. mowerman
    wow,,,,,a movie star as well....bob
  21. mowerman
    Well, best of luck to you… bob
  22. mowerman
    One of my first gigs as a sub hauler did not stick around very long … bob is
  23. mowerman
    I did a little harbor work years ago. There was very little money in it. I’m sure it’s not changed. From what I hear the brokers, take it all and give you droppings.
  24. mowerman
    Already took a look at the eclipse a couple of times, and it’s already too cold around here to feel like doing anything
  25. mowerman
    Thanks for that paul Not sure what I’m gonna do today Weather is going south around here real quick and losing my drive real quick on account of it but yes more work on the frozen bolts again try to move them wouldn’t budge attempted to drill out busted to drill bits looks like I hope to use your idea Paul chop a hole in the fiberglass, pull out the plate and use nuts and washers pissed about the broken bits because it was drilling through real easy like I thought. Oooooooooooo well plan c lol

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...