mowerman

hey ,,,noticed alotta you newbe,s around this site nowdays,and buying old trucks,thought i would give you fellars a fare warning about maxi brake pots,a lot of you guys dont realize they have a lethal high powered spring in them,,that can kill you ,or cause severe bodily damage,,,when your working around them,try to keep your body parts away from open end,with the key hole,,and if you find one leaking,,just remove it from the truck real carefull,and replace the pot,,dont try the repair it,,,its not worth the risk,,people have been severely injured,with these brake pots blowing apart,,,a friend of mine was outta work a whole year due to one exploding,,and just grazing his face,,got lucky,,,be careful,,guys...enjoy your hobby,,,bob

wow,,,see what you mean,,certainly is ready to go,,not hard to look at,,saw a u model in truck paper 74,55000 or miles $7500,looks excellant,,,need money man.lol..bob

oh man,,,i forgot about that thing,,,, had one in an f model,,it was also a piece a shit,air shift,it would hang up in nuetral,especialy when it was cold,i even tryed rebuilding the clylinder,still did it,lol boat,,anchor baby...bob

ya,,,well i bet you ,and mike get clobbered regularly.lol...bob

ya,,,thats a good idea,,im planning on doing the same thing,,but also putting brand new tires all around,also,i better plan on spending a couple a G,s,lol...good luck,bob

boy,,,thats a neat little ride,there,,wow it would look good in my yard,,,lol.bob

oh ya,,those things are godsent,,but ofcoarse not everyone owns them..i have a motorcycle jack,for harley,,was just wondering if i could use that,,,you know i bet i could...bob

well i think the bottom line is once a guy gets used to a straight fuller ten,,they are like walking backwards,,thier kind of fun,but have to pay attention at all times,,soon as start daydreaming,or talkin on the cb,automaticly start grinding gears

that sounds good,,both i drove had electric,not a good setup,bob

the big shops generally use a big type special jack for tire,and hub removal,,but you can put a board slide it under tire and put abuncha grease on the board then raise the truck just so you can just barely turn the tire on the board then have a guy give you a hand pulling the whole thing straight off the spindle sliding it easy on the greased board,,,just a little helpful hint,works like a charm if you do it rite,,also put a little grease.on bottom of tire.good luck,bob,oh have that other guy bring beer,lol.

oh ya,,,those 2 speed axles were also a nightmare,,half the time they wouldnt go in,,oh by the way welcome back bill,,do you get any extra time off?

ya mean the pete or the trans?we had a bunch of them in our older kenworths,everyone hated them..bob

i suppose thats a good point.lol...bob

dont think they lasted long,,dont hear much about them,seems they were around from like late 80,s to early ninty,s.bob

i drove one in a pete,i didnt like it,but it had the electric gas pedal shut off,that only gave you like 1700 rpm,s so if you were on a slight grade,and shifting up from a traffic light,buy the time you let the gas off the truck would slow down too fast and wouldnt click into hi,,it was a pain in the ass,,would have been ok with a little more throttle,,,who the hell designs this rediculous stuff..bob

you have to split every gear,,like a two stick,sept with a switch,like the mack was,or maybe still is,,bob

ya,,lol...i see where on the same page...woohoo,that sounds fun,,good exersize if nothing else,,,lord knows i could use it.lol.bob

was lucky enough to get this guage out of a oakland ca.fire engine along with the tach,a steering wheel,and stop ,and throttle cables,,everthing is in excellant shape.bob

is that frying pan,for cooking,or smackin you ,and your freinds??curious bob.come on?

ya,lol that would be like the rodeo sex,like your sister likes it this way ...bob

yyyyyyeeeeeeeesssssssssss!!!!!!!!!!!!you are the man.but talk about a hussler.lol.bob

someone is selling a 70,in the classified,,im going nuts,,,hell he only wants like $1500 bucks for it,,cant even buy tires for that,twin axle,sleeper,geat deal,and it looks real straight,and rust free,,,man i wish i had the dough,,,guess thats everyones problem..bob

i call $250..bob

see now thats what i call paybacks bitch!!!!lol...bob