slpwlker

D'Oh. Hell man I'd of helped or gotten in the way with that car. Must of been like a dog sniffing around till you found the sent.Will do. I like them alittle nutty myself.Make some nut free ones later.

If it isn't much bigger then a Cat 773 i'll take it as is.

Thanks. I just do not think it would hold up on the first big pull under power. Almost had to shoehorn him into the bobcat. should of seen the wood we had under the tires just so we could get under to take stuff down. Yeah I ain't exactly slim myself. I hid all junk food I could find. Gonna have to lock the truck tomorrow. Damn I just told him where it all is.

Never cared for those beads. Never seemed to work worth a crap for me. I balance mine also and let the Centramatics take the rest, Also with dirt,Mud, and Grime. Just need to get a different set then the truckstop sells for the floats

Staying at the motel till tomorrow probably. then play security by the shop. Let Buster chase the pussy around. It is a Fuller RTLO20918B I think Not looking at the tag and I have it written in the truck. It is a big bastard.

Probably the damn mutt. Thinking about locking him in the bunk with a baby gate. When he wants attention he jumps in the lap and hits the shifter. Yeah funny thing is as I got closer to Robs the louder it got. I was like just make it.

Afraid of metal going in places it wasn't supposed to go

Well here we are. Last week I started hearing strange things underneath our feet. ( Was hoping it was only the voices saying sell,sell,sell) Wait thats Cramer. Rob had offered the use of his shop and help. ( to which we are greatly appreciative) Last night after a bunch of cussing that damn brand x to kingdom come, Even threatening to chop it and sell the parts for morethen the whole assembly. We got the Trans out about midnight and loaded in his pickup. I will say this ole Crusty runs good. Looked blacker then black lastnight. Ow well. Trans after getting it out of the truck Before picking it up with the bobcat. Picking it up with the Bobcat Anybody see whats missing? Wasn't to bad so I thought. Then got a phone call they found hairlines in a few of the gears ughh. Tooth from above

Might be a newer 6 speed. had a couple single stick 6 speeds in a few tractors I drove. looks like just a 6 speed with a 2 speed rear so what a poor mans 12 speed

interesting looking R thats for sure

If you have floats you need to have aluminum rims Stork. been trying to get to Alvarado,Tx to pick up a set for the front of mine. Got them on the back 3 axles and putting them on the trailer along with the Crossfires to just inflate in one spot

okie dokie

But,But you got to get rid of the Cat powered X-Brand in the way now. Just sitting here under the shade tree. looked over your newest addition.

as stated on Fb Happy Birthday

That a poor mans Mack.

usually a few hundred pounds maybe 1000. Best to go to bfg's site and look up the specs. Started putting Continental HSR2 LRH 16 ply tires on but they are not cheap by any means. so far riding good and little better fuel mileage. Gonna finish out the trailer and do the rest of the truck. Had to put Yokes on the steer.

Yeah you can leave it in and tear stuff up. Sounds like this moron needs to go to La or Fl where the dirt is totally different and let him be the rookie again

Yeah someone like that you need to put in there place the first time he mouths off to you. Your a better man then me He would still be walking or they would be still looking for his body

Nitrogen tank or accumalator is underneath. Everybody loves them. I hate it and will not buy another one. Or it will already be plumbed to run of the pto and the lever will be on the back. Not convert it. but battery power will never happen again. probably will just go back to the old style shim and go less stuff to go wrong

Hell I left thursday went to the truck stop and scaled. Was 7k over on the trailer. went back and moved the 8k of counterweight to the back or front of the trailer reloaded and dropped the trailer for the memorial day weekend. Might of been another one I do not remember. came back tuesday and picked the trailer up set everything walked to the back to check lights and it was bent. This you can't back with on the ground it is made to be lifted the hydraulic and nitrogen system supposed to move and give and equalize out. My system has been flawed from day one.

It's already back home. My dad drove my pickup out to Houston brought me 4 tires and took it home. It is fixed but now we are taking the hydraulics off and making it an airbag system. Had to many problems with the original system and going to canabalize it some more. First pic load I had on when I tweaked it Second pic is of the bend 3rd more tweak right side Cylinders are all the way out and top is hitting on the swivel Crease on the bottom

Yeah it was Rob. Few loads later it malfunctioned and I bent the coupler. Couldn't get the right weight down and didn't trust it to run it.

Yeah I can't scale it in Nv and forget Ks without the spreader bar. Might have to load it backwards over the neck

for a tag trailer I like Eager Beavers

Thats bigger then the specs and dims you posted. http://www.ritchiespecs.com/specification?type=&category=Elevating+Motor+Scraper&make=Caterpillar&model=633D&modelid=94137 http://www.ritchiespecs.com/specification?type=&category=Motor+Scraper&make=Caterpillar&model=633D&modelid=94108 http://www.ritchiespecs.com/specification?type=&category=Motor+Scraper&make=Caterpillar&model=633E+Series+II&modelid=94119