Jump to content

39 Baby Mack

Pedigreed Bulldog
  • Posts

    1,900
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by 39 Baby Mack

  1. Sorry about that, you guys are better on the computer than I am! Ron
  2. Thanks for posting, remember seeing them a lot on the way to Saratoga on the Thruway! Ron
  3. I've put a couple on other vehicles in the past! The one on the pick-up I put red LED's in his eyes and wired them into the front parking/turn signal circuits. When the parking lights were lit they burned steady and when you used the turn signals he'd wink at you! Ron
  4. I'm planning on going if I get the truck back together! I am in the middle of replacing the king pin on the drivers side, have the pin bushings and reamer but needs a new thrust bearing and can't find welch plugs to seal up the bores. You know how that goes! Ron
  5. That was going to be my suggestion Matt. To change the air compressor and run a Vickers pump. He is right though the early power steering pumps were Eaton and drove off the back of the generator. They used a special end frame for the generator so the pump would mount to it and a small rubber coupling to drive the pump. We had 2 '58 "B" models with that set up on them for Ross assist power steering. As an added bonus he could rid of the generator and change it over to an alternator! Ron
  6. Thanks Mike, see you there! Ron
  7. Mike John still has some stuff but he doesn't have the rubber seal I'm looking for. Fifth Wheel used to have it but I can't seem to be able to get in touch with him. Ron
  8. Looking for seal for rear window in Mack "E" model. Ron
  9. PSSSSSsssssssssssssssssss---------------- What's that noise!!!! Ron
  10. Ray That's an E-6. Has side covers where the lifters are. When the E-7 came out they did away with them. Ron
  11. Welcome to the nuthouse! Nice lookin' International. Ron
  12. No our 93 "MH"'s were E7-300's but I don't see where that would make a difference? We had 2 '85 "MH"'s with EM6-300's and 2 '87 "MH"'s with E6-300's and they all had the boxes on them like yours. Ron
  13. That's what I thought. Our '93's didn't have the boxes, must have been a mid year change? Ron
×
×
  • Create New...