Jump to content

bmking16

Puppy Poster
 View Profile  See their activity

  • Posts

    43

  • Joined

  • Last visited

 Content Type 

Everything posted by bmking16

  1. bmking16
    Joey, not a problem at all. I did find a shop not to far from me. Getting prices on recoring it or repairing it. Trying to see if its worth trying to fix ourselves since my brother is able to braze. We did mange to get the radiator out of the truck last night. Bushings were shot after 34 years lol, so going to replace them. just don't want to spend a couple thousand on a new radiator especially since the truck isn't used everyday or as a work truck. Just a project truck.
  2. bmking16
    joey mine is a 613
  3. bmking16
    Joey, I didn’t get a chance to call watts yet. I thought someone might know or have the numbers off hand.
  4. bmking16
    Anyone got a replacement number or where to find one?
  5. bmking16
    Hey guys the rack on my 87 with the AMBAC 300 injector Pump PLM4503C3BR is stuck. Any ideas how to free it or is there a replacement pump for it? I can't seem to find any documentation anywhere on this pump.
  6. bmking16
    Do you happen to know what switch you used?
  7. bmking16
    Any of you guys have the RW series operators manual or the T2090/T2100 transmission manual in a PDF file? I had them on my pc and can't find them now and it's annoying me that I lost them
  8. bmking16
    Yep after seeing the picture that's a totally different box than on mine
  9. bmking16
    I want to do the same thing on mine also and get it back to how it originally looked. Mine looks similar to yours was with the straight pipe now
  10. bmking16
    RealDiehl try this number at the Mack dealer - 6990-HFB640001 that was the seal kit for my 87 and I got it from the local Mack dealer
  11. bmking16
    Lol. Thanks so much for the answers, I apprecaite it. Yeah the stack on there they put was a 7 inch and it just doesn't look right and needless to say its hacked up (pipe clamps missing, etc.) You guys know how it is LOL
  12. bmking16
    Mine's a 350 E6. They put a oversized exhaust on it before i got it and to be honest its not the neatest job they did.
  13. bmking16
    For the Superliner guys out there, would any of you know what size stacks the truck would have come from the factory with?
  14. bmking16
    Looks good. Is the Lights\Park swith a lighted one too?
  15. bmking16
    Same Truck about 20 years later painted blue
  16. bmking16
    Here are my dad's from the 60's
  17. bmking16
    Welcome from Northeast PA!
  18. bmking16
    For anyone looking for this is Stemco #383-0139.
  19. bmking16
    Would anyone have the part number for the inner wheel bearing seal for 12,000 lbs front axle?
  20. bmking16
    Mine are running slow. I was also looking to take the motor off and clean it. I haven't tried yet, but if you remove the top dashboard peice above were the headlight switch is you can see where its coming though the firewall and on mine it looks like there are two snap rings holding the arms on (as HarryS stated)
  21. bmking16
    Thanks for the responses guys, I appreciate it. Can I ask if any of you guys that had to replace the air dryer, what did you use?
  22. bmking16
    Its an 87 RW613. The one on there doesn't seem right. Someone ran the lines to it over the the top of the frame. I'll have to post a pic for you guys when I get a chance.
  23. bmking16
    Would any of you guys know the part number for the air dryer on the superliners? Mine currently has a Haldex Pure Air KN33000. Im not sure if that was the correct one for the truck as it was on there when I got it. It has a slight leak in the housing and I'm trying to look into some options for either fixing or replacing it.
  24. bmking16
    Ok perfect, thanks again!
  25. bmking16
    Thanks as always for the info guys! Phil pluggin that up won't bother anyting?

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...