Jump to content

eddeere

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    817

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by eddeere

  1. eddeere
    I did not know the truck was for sale . I doubt if I could afford it with freight from California . Would like to know what the truck went for or any other details . Maybe the buyer just contacted him and made an offer he could not refuse . Could have been the sellers plan all along .
  2. eddeere
    I remember the truck . It was a short wheel base , yellow , S/A , shinny budds , H 63 . The guy had not been on the site in a few years . He posted a picture of the truck with new tires . I asked about the tire sizes and he responded . I think that was his last post . Wish the the truck was mine
  3. eddeere
    I have the same problem glass to tight in the lower channels . I had new glass made for both doors The right side works great . I think they must have made the left side to large . With new felts in the channels you have to crank hard and pull to get the window up or down . I tried what Maddog said but used some, oil did not help . I have the glass out now and going to take back to the glass shop . I hope they can take about 1/8 " off . The weld on the channel brace to door was broken in one place . I just brazed it back . Maybe some one else had the same problem and this was their fix . Good luck . .
  4. eddeere
    A lot of good work and information .
  5. eddeere
    Thanks. Does the glass need to be up or down to drop the panel ? After twisting the panel up ,down, back and forth all I have done is some how gotten the glass out of the tracks on the panel . If I take the regulator and everything loose the panel should come out leaving the glass inside removed next . Not part of the plan or the way it came out two years ago . I am sure it will go back just as easy .
  6. eddeere
    I used some glass setting tape from Restoration Specialties . I do not know why some thin rubber and adhesive would not work .
  7. eddeere
    Replaced the roll up glass on my B a couple years ago after a struggle got everything back together . Need to remove the glass on one again . Got everything apart except the crank assembly on the panel and can not get the window out . Can some one give me a step by step procedure on on removal . Thanks in advance .
  8. eddeere
    I get 8 to 10 calls a day . Google business account ,pay off student loans , & extended warranty . If I do not recognize the number I just do not answer . If you had time it wood be good to keep them on the phone and screw with them .
  9. eddeere
    For anyone interested Mack Superliner tractor Mack trans. low hole $5500 . Saw this in the 21 Feb. issue of Farm & Dairy pub. Should be in the central Ohio area . No connection . 740 509 0768
  10. eddeere
    I tried to look for the Liz Warren posts but could not find what I first saw . Wondered what happened .
  11. eddeere
    My doors were ok until I installed the new weatherstrip . The right door is good the left can not be closed all the way from the inside . You have to slam and push from the outside to close . Thought if I left it closed all the way the weatherstrip would eventually give in and form to the door lip . Months later still no improvement . I guess my next step is start cutting the strip with a razor knife .
  12. eddeere
    Enjoyed the pictures .
  13. eddeere
    Great idea but most of the democrats would not go along with this .
  14. eddeere
    Sharp looking truck.
  15. eddeere
    What are they building ?
  16. eddeere
    Enjoyed the video . Thanks for taking the time to film it .
  17. eddeere
    Great looking paint job . I have not used Imron in years . I thought it was easier to spray than acrylic or single stage . Went on like the old straight enamel . I do not think any thing holds up better than Imron . From some of the old Dupon literature I have seen pictures of fire trucks that have been to close to the fire and the plastic melted in the turn signals but the Imron paint was sill good . I think cost was the main reason I stopped using it.
  18. eddeere
    There is couple of them around there . Wanted to stop but never see to have time . Going out this spring and plan to stop .
  19. eddeere
    Just got back to Ohio in time to miss the snow. Grain elevator and cotton bales in Texas . Rest NM.
  20. eddeere
    An Autocar working in New Mexico Jan . 2019
  21. eddeere
    I ordered a Thermodyne emblem from Watts . The shipping was $20.00 maybe the insurance added to this . In the end it did not make any difference I dropped it and it broke in half.
  22. eddeere
    My doors fit almost perfect until I put the foam door seals in . The right side is ok but the left is hard to close . The white and brown B 61 at the Lexington KY show with the factory sleeper did not have the foam seals . I asked the owner about them . He said the doors fit perfect without them so he left then out . I do not think he drove the truck much .
  23. eddeere
    Enjoyed the pictures . I agree I do not think the coils meet the required standards for hauling coils . Maybe they are light weight.
  24. eddeere
    J Handcock I have 3 1/2 " spacers now . Where did you get the spacers an clamps ?
  25. eddeere
    Great color.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...