Jump to content

1wonton

Bulldog
 View Profile  See their activity

  • Posts

    141

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by 1wonton

  1. 1wonton
    Looking for good running B model Mack, B61 or B75 in northwest or west coast. ron
  2. 1wonton
    No longer needed.
  3. 1wonton
    Need generator (power steering end) for '65 B model, Delco-Remy #1009365. ron
  4. 1wonton
    STILL LOOKING FOR BATTERY BOX COVER FOR B MODEL MACK.
  5. 1wonton
    Mack and 60 Cat 6
    B-75 and Cat sixty. A HAIRY trip down the Grapevine.
  6. 1wonton
    Mack, Cat and ron 6-15-2022 Bakersfield.
    Hauling sixty Caterpillar with '65 Mack B-75. Lancaster Ca to Bay area.
  7. 1wonton
    The firing marks are on the flywheel, take off the inspection and you will find them. Otherwise place the timing lever in full retard, then just set #1 to fire on TDC (pull out the spark plug and notice the air rushing out. You can use a flashlight to thru the hole to determine when the piston id TDC). Then set the mag to fire about 30 degrees ahead of this position. It's not critical either way, just set to where it starts easily. Too far retarded and it will overheat, too far advanced it will try and kick back when you crank it. It's pretty safe if it does kick back, it won't kill you like a Model T.
  8. 1wonton
    Frank; I don't have any extra bottoms, thanks anyway. ron
  9. 1wonton
    Thanks 67; I don't want new looking covers as they wouldn't match my truck. I would love to get the covers; do you have an idea as to what it cost to ship to 94590? ron
  10. 1wonton
    Thanks Freight; let me know if you have a usable cover. ron
  11. 1wonton
    Looking for battery box cover for '65 B model Mack. I stupidly ran over mine, flattened out like a pancake...................... R model will wor; where can I buy one? rron
  12. 1wonton
    Anyone know what kind of starter motor was used on the Bulldogs that were equipped with starters? ron
  13. 1wonton

    AB Mack

    1wonton replied to 1wonton's topic in Trucks for Sale

    Sorry, $7500.
  14. 1wonton

    AB Mack

    1wonton posted a topic in Trucks for Sale

    AB Mack. Not sure of the year but has about 1930 AB six cylinder engine. Engine excellent running, no bad noises, good oil pressure, starts easily. Dump works well, fair to good tires. Runs, drives, five speed Mack trans. Good radiator. Dump bed rusted thru in one place, otherwise good running truck. Located Vallejo, Taxifornia. ron 707 333 8863
  15. 1wonton
    4
  16. 1wonton

    AB Mack

    1wonton replied to 1wonton's topic in Trucks for Sale

    Thanks Mike, the fenders appear to be earlier so I thought the engine was a replacement, also has a five speed transmission so mu be a later replacement, really a nice engine though.
  17. 1wonton

    AB Mack

    1wonton replied to 1wonton's topic in Parts Wanted

    Yes, definitely an AB, can't tell what year.
  18. 1wonton

    AB Mack

    1wonton posted a topic in Trucks for Sale

    AB Mack for sale in northern ca. Not sure of year but appears 1920's with 6 cylinder engine, probably a replacement. Engine runs beautifully, no knocks, bad sounds and zero exhaust. Truck has Mack 5 speed transmission, chain drive, runs well, stops very good. Old Mack has seen a lot of miles but still runs very well. Dump bed pretty beat up and rusted out as seen in pictures but works very well. Hydraulic dump. $7500. ron 707 333 8863
  19. 1wonton

    AB Mack

    1wonton posted a topic in Parts Wanted

    Looking for AB engine in decent shape, West coast. ron
  20. 1wonton
    Looking for engine for AB Mack. ron
  21. 1wonton
    Can't get my damn phone to send pictures, old shot Firestone tires say 1100 x 24, I have to assume that's a 24' rim but I didn't measure it.
  22. 1wonton
    I'll give them a call. Sorry for the misunderstanding; I have Budd hubs, Budd ten-hole wheels on the truck, not Daytons. Just looking for something as close to the original 1100-24 diameter, doesn't matter 24.5 or 24 since I could use either. 1000-20 are smaller than what I want. Thanks again.
  23. 1wonton
    Thank you. I looked at the CEAT website but didn't find these tires. I tired calling but the number wont work. Are you saying that the 1100 24 tire is available form this company? I can buy used Budd 24.5 rims for $15 a piece, maybe the easiest thing would be to convert to this size. Where would one find a US dealer if the 1100s are available?
  24. 1wonton
    Sorry for being so dense but when you say "easiest thing to get new 1100-24 rubber on it" do you mean 24.5 rims and tires? ron
  25. 1wonton
    What rims would I use for the 12.00R tire?

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...