b61fred Posted July 17, 2009 Share Posted July 17, 2009 Hey I thought I would post a picture or two of my newest truck, r797, 1973 model. Not to bad, need to repair one head due to a bad guide causing excesive blow by( note the custom road draft tube) After a valve adjustment the engine ran very well. I hope to have it lined out for the White River show in Elnora Indiana. Fred Quote 15 gears...no waiting! Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/ Share on other sites More sharing options...
Rob Posted July 17, 2009 Share Posted July 17, 2009 Aww man, another long hood V8 powered R model and I got no money, nor physical anatomy left to give so I could have it.Damn, life sucks sometimes.Looks to be a real nice truck.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38177 Share on other sites More sharing options...
Frenchy Mack Posted July 17, 2009 Share Posted July 17, 2009 Very nice truck, you are an lucky man Best regards from France Quote Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38189 Share on other sites More sharing options...
mopar Posted July 17, 2009 Share Posted July 17, 2009 Cool rig Quote Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38191 Share on other sites More sharing options...
Mike Posted July 18, 2009 Share Posted July 18, 2009 Aww man, another long hood V8 powered R model and I got no money, nor physical anatomy left to give so I could have it.Damn, life sucks sometimes.Looks to be a real nice truck.RobRob,Do I recall once you saying that you have plenty of room just incase a truck needed a bigger home or something to that nature ?mike Quote Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38200 Share on other sites More sharing options...
Rob Posted July 18, 2009 Share Posted July 18, 2009 Rob,Do I recall once you saying that you have plenty of room just incase a truck needed a bigger home or something to that nature ?mike I've got plenty of room for most any Mack to come home to.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38201 Share on other sites More sharing options...
Mike Posted July 18, 2009 Share Posted July 18, 2009 I've got plenty of room for most any Mack to come home to.RobWell Fred did say you and he were going to mack video of the shifting of the B.......so I guess you will be invited to see this new member of Fred's family...... right ?mike Quote Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38204 Share on other sites More sharing options...
b61fred Posted July 18, 2009 Author Share Posted July 18, 2009 Well Fred did say you and he were going to mack video of the shifting of the B.......so I guess you will be invited to see this new member of Fred's family...... right ?mike I made that video and never can figure out how to get it from the camera to the computer. I will have to try harder. Morgan Quote 15 gears...no waiting! Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38208 Share on other sites More sharing options...
HK Trucking Posted July 18, 2009 Share Posted July 18, 2009 I made that video and never can figure out how to get it from the camera to the computer. I will have to try harder. MorganVery nice find, Fred!I see it has the 2 stick 6 speed, must have pulled a trailer dump or lowboy.Regarding that video, do you have a "Photobucket" account?That's how I do it, just upload the video to photobucket, then copy and paste the link to the video in your post here, and to view you just click on the picture.Example:Looking forward to seeing that once you get it posted.. Quote "If You Can't Shift It Smoothly, You Shouldn't Be Driving It" Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38209 Share on other sites More sharing options...
Greg Rider Posted July 18, 2009 Share Posted July 18, 2009 I've got plenty of room for most any Mack to come home to.RobKeep it up and you'll have alot more room in your underwear! Momma lops off more and you will have nothing to barter. Quote #1 on A-model registryIf I drink because of work, why can't I drink at work? Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38210 Share on other sites More sharing options...
b61fred Posted July 18, 2009 Author Share Posted July 18, 2009 Very nice find, Fred!I see it has the 2 stick 6 speed, must have pulled a trailer dump or lowboy.Regarding that video, do you have a "Photobucket" account?That's how I do it, just upload the video to photobucket, then copy and paste the link to the video in your post here, and to view you just click on the picture.Example:Looking forward to seeing that once you get it posted..HI, I cant seem to get it from the camera to the computer.. I can finalise the disc and put it on the comuter but there should be a way to get it from the camcorder to the PC via a cord or wire. I will have to take the time and try again. Thanks for the kind words on the r 795. Due to the length and low hole trans and appers that it had a winch on it at one time I would say you are right on the money. I appers to have been taken care of most of its life but I think it had changed owners and didn't get the care it had before. The only reason I bought it was it was about ready to be sold to the people that send trucks to mexico and south america. I would say that It would have been parted out and junked because it needs some engine work, steering box and wiring repairs. I think I will fix the engine, steering and wiring and make someone a nice truck to enjoy fixing up, I have too many as it is. I just couldn't bear to see it junked.. I guess I have been listening to superdogs preachings from the book of mack! Quote 15 gears...no waiting! Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38212 Share on other sites More sharing options...
Mike Posted July 19, 2009 Share Posted July 19, 2009 HI, I cant seem to get it from the camera to the computer.. I can finalise the disc and put it on the comuter but there should be a way to get it from the camcorder to the PC via a cord or wire. I will have to take the time and try again. Thanks for the kind words on the r 795. Due to the length and low hole trans and appers that it had a winch on it at one time I would say you are right on the money. I appers to have been taken care of most of its life but I think it had changed owners and didn't get the care it had before. The only reason I bought it was it was about ready to be sold to the people that send trucks to mexico and south america. I would say that It would have been parted out and junked because it needs some engine work, steering box and wiring repairs. I think I will fix the engine, steering and wiring and make someone a nice truck to enjoy fixing up, I have too many as it is. I just couldn't bear to see it junked.. I guess I have been listening to superdogs preachings from the book of mack!Fred,You have my respect for keeping the truck in this country. I hope you enjoy it for many years to come. It looks really good. Will you keep it the same color or come up with a custom look ?mike Quote Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38230 Share on other sites More sharing options...
other dog Posted July 19, 2009 Share Posted July 19, 2009 I made that video and never can figure out how to get it from the camera to the computer. I will have to try harder. Morganstupid computers! (freighttrain) I bought a Panasonic hard drive video camera last year, and it will not work with this computer. I used the disc that came with the camera to install the program and it's supposed to work with windows vista but it does not recognize any video. It does show still pictures taken with it, but not video. I can download the video from it using windows media center but not Panasonic video suite. That's why I put stupid videos on youtube, I didn't know you could put videos on photobucket, or flicka, or webshots. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38234 Share on other sites More sharing options...
Mike Posted July 19, 2009 Share Posted July 19, 2009 stupid computers! (freighttrain) I bought a Panasonic hard drive video camera last year, and it will not work with this computer. I used the disc that came with the camera to install the program and it's supposed to work with windows vista but it does not recognize any video. It does show still pictures taken with it, but not video. I can download the video from it using windows media center but not Panasonic video suite. That's why I put stupid videos on youtube, I didn't know you could put videos on photobucket, or flicka, or webshots.Mornin Tom,Just wondering if you are still going to show up with the mixer at Linconton, NC the 24th ? How will I need to exit to find the farm from the interstate ?mike Quote Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38235 Share on other sites More sharing options...
other dog Posted July 19, 2009 Share Posted July 19, 2009 Mornin Tom,Just wondering if you are still going to show up with the mixer at Linconton, NC the 24th ? How will I need to exit to find the farm from the interstate ?mikeI'm planning to show up the 25th, but I won't have the mixer there. I just don't want to drive it that far-the longest trip I usually make with it is to the Cumberland county Christmas parade, which is about 55-60 miles each way.The ad says from I-40 take exit 123 and go South on U.S. 321 to exit 33 (Startown Rd.) and follow the signs. For more info call Brad Wike at 828-612-3447. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38239 Share on other sites More sharing options...
Freightrain Posted July 23, 2009 Share Posted July 23, 2009 My new laptop won't accept a direct line from my Handycam like my old laptop did. Can't seem to find a driver to make it work either. Now I have to use my VCR and copy it to tape, then back to laptop............what a pain. Windows Vista.........what a wunderfool thing!Love to have an old V8 truck! Just couldn't imagine the fuel it would go through LOL!!! Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38369 Share on other sites More sharing options...
Greg Rider Posted July 23, 2009 Share Posted July 23, 2009 Yuoins must have sumthin crazzy cause I can huuk a caybull frum my fone to da cornputer and day gits along fine! Quote #1 on A-model registryIf I drink because of work, why can't I drink at work? Link to comment https://www.bigmacktrucks.com/topic/10077-new-dog-at-my-place/#findComment-38373 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.