Timothy Maikshilo Posted March 30, 2006 Share Posted March 30, 2006 Hey everyone, I'm going to replace my kingpins in a week or two. Any suggestions would be very much appretiated, Tim Quote Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/ Share on other sites More sharing options...
Rob Posted March 30, 2006 Share Posted March 30, 2006 Hi Tim, are they a straight or tapered pin?Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5161 Share on other sites More sharing options...
Freightrain Posted March 30, 2006 Share Posted March 30, 2006 Tapered will fall out pretty easy...been there! Took longer to get the tools out then knock the pins out of my B.Straight pins............well, if they are like my Ford trucks....get ready to work a few days! Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5169 Share on other sites More sharing options...
Timothy Maikshilo Posted March 30, 2006 Author Share Posted March 30, 2006 Hi Tim, are they a straight or tapered pin?RobThanks guys, I honestly don't know what I have. It's a "92" superliner with a 14,000 lb front X. I've avoided it all winter and now it's time to get r done,thanks Tim Quote Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5170 Share on other sites More sharing options...
rsmartyn Posted April 1, 2006 Share Posted April 1, 2006 Hi Tim, Remember what Dirty Harry said? "A man's got to know his limitations". Mine is getting too envolved with repairs that take too long and keep me from working my stuff to make money. So if I'm not sure of how to do a certain repair or if I need special tools or equipment to do it sometimes I bite the bullet and pay somebody who can so I can get back to work ASAP. Last time was last fall when the thru shaft went on the DM tandem dump. I was really busy working and still had the "B" to keep going so the $1,140 I paid Trenton Mack to fix it was worth it. BobPS: Maybe they're adjustable, the B model's front axle are and after 23 years have been adjusted once and greased alot. Bob Quote Ain't a Mack? Take it back! Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5181 Share on other sites More sharing options...
twostickmutt Posted April 1, 2006 Share Posted April 1, 2006 tim. like bob said, see if they are adjustable. you may just have to wind them down a little. you can tell by lookin' at the bottom of the king pin. remember the ol' "sugar shack". i thought i had a bad one and was ready to change it and found out they were adjustable. a whole lot easier. j.j. Quote and remember "PREFORMANCE COUNTS" Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5184 Share on other sites More sharing options...
Timothy Maikshilo Posted April 1, 2006 Author Share Posted April 1, 2006 tim. like bob said, see if they are adjustable. you may just have to wind them down a little. you can tell by lookin' at the bottom of the king pin. remember the ol' "sugar shack". i thought i had a bad one and was ready to change it and found out they were adjustable. a whole lot easier. j.j.Hey Bob and J.J., thanks I have looked at the adj. and cannot be tightened anymore. Today I take her out of winter storage and get things tip top. It was 70 degrees here yesterday...crazy but I'll take it and get to work, Tim Quote Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5185 Share on other sites More sharing options...
Paul Posted April 1, 2006 Share Posted April 1, 2006 The adjustment is for the thrust button or thrust bearing for up and down play [ so that the axle is riding on the bearing instead of the spindle]. It Will Not take up play made by worn pins and or bushings. Quote Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5187 Share on other sites More sharing options...
roadusercharges Posted April 2, 2006 Share Posted April 2, 2006 Ti,Ive done mine twice now, once cos the right hand stub axle broke and the other due to the accident.remove the screwed bottom cap with the Mack tool or a peice of 1/4 steel welded to a handle, place a steel support directly under the stub axle forging, remove the grease cap from on top, place a neat peice of shaft on the top of the kingpin and give it one almighty f$cking smack with a sledge hamer, if you only tap it, it wont budge, and if you dont suport it, then the shock wont travel through.the Mack king pin kit should comprise 2 kingpins and 4 sintered bearing shells.nig Quote Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5196 Share on other sites More sharing options...
fullfuel01 Posted April 2, 2006 Share Posted April 2, 2006 don't worry about king pin Tim, ad a second turbo and keep these 2 tires far from the ground. E9 power. Quote Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5208 Share on other sites More sharing options...
Timothy Maikshilo Posted April 2, 2006 Author Share Posted April 2, 2006 don't worry about king pin Tim, ad a second turbo and keep these 2 tires far from the ground. E9 power.Hey Jeff, sounds like a good idea...I just need to add a couple wheelie bars! Tim Quote Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5211 Share on other sites More sharing options...
kevin mccune Posted May 2, 2006 Share Posted May 2, 2006 don't worry about king pin Tim, ad a second turbo and keep these 2 tires far from the ground. E9 power.Bet you light the night sky up -Kevin Quote Link to comment https://www.bigmacktrucks.com/topic/1016-king-pins/#findComment-5613 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.