M54A1 Posted September 17, 2009 Share Posted September 17, 2009 I am doing a frame off restoration of my B613-LT, while everything was apart I wanted to switch from my non overdrive duplex to a triplex which I have found locally, but the triplex has an ear broken off of the main case where it bolts to the flywheel housing. I was wondering if there would be any problem with putting the triplex compound box on my duplex main box, they should be the same main box right? Thanks Jase Quote Link to comment https://www.bigmacktrucks.com/topic/10688-swapping-boxes/ Share on other sites More sharing options...
theakerstwo Posted September 17, 2009 Share Posted September 17, 2009 Some of them are and some of them ant. I cant tell you any more than that and that strained me to think of that. If you have the broken peice that is broken then it can be welded as good as it was when it was new. glenn Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/10688-swapping-boxes/#findComment-40489 Share on other sites More sharing options...
HK Trucking Posted September 17, 2009 Share Posted September 17, 2009 Perhaps you'd encounter that same problem as when mixing & matching quad box mains & compounds of different vintages:The output gear on the main box may not match the compound countershaft drive gear.Just speculation on my part.. Quote "If You Can't Shift It Smoothly, You Shouldn't Be Driving It" Link to comment https://www.bigmacktrucks.com/topic/10688-swapping-boxes/#findComment-40490 Share on other sites More sharing options...
Maddog13407 Posted September 17, 2009 Share Posted September 17, 2009 if your up for the task, gut both boxes, use the main off the duplex with the back off the triplex and put it back together. when i cleaned 45yrs of grime off my duplex i found someone exploded it at one time and brazed the piece back in. i didnt like it so i gutted a quadbox that was junk anyways and used just the case from the quad and the back half from the duplex with all the duplex main internals, Matt Quote Link to comment https://www.bigmacktrucks.com/topic/10688-swapping-boxes/#findComment-40491 Share on other sites More sharing options...
M54A1 Posted September 17, 2009 Author Share Posted September 17, 2009 What would determine if the main gear will fit the compound shaft, do both mains need to be non overdrive, maybe the compounds that originally came behind a non overdrive main will not fit an overdrive main, could this be the difference Quote Link to comment https://www.bigmacktrucks.com/topic/10688-swapping-boxes/#findComment-40493 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.