Jump to content

Recommended Posts

my 80 mack with a 237 has a wiered idle problem. start it up and idles fine after 5 minutes or so it will jump up about 200 rpm's and idle to high. if i wack the throtle it will come back down and then it will eventually high idle again. injection pump was done 2 years ago. any thoughts?

88 R686st

80 R685

93 Ford L8000

02 Ford F550xl

06 Ford F550xlt

06 Ford F350 lariat

Link to comment
https://www.bigmacktrucks.com/topic/11909-idle/
Share on other sites

my 80 mack with a 237 has a wiered idle problem. start it up and idles fine after 5 minutes or so it will jump up about 200 rpm's and idle to high. if i wack the throtle it will come back down and then it will eventually high idle again. injection pump was done 2 years ago. any thoughts?

My guess would be the throtle lever is broken try replacing that first!

Link to comment
https://www.bigmacktrucks.com/topic/11909-idle/#findComment-45599
Share on other sites

my 80 mack with a 237 has a wiered idle problem. start it up and idles fine after 5 minutes or so it will jump up about 200 rpm's and idle to high. if i wack the throtle it will come back down and then it will eventually high idle again. injection pump was done 2 years ago. any thoughts?

I Be guessing problem with governer

Link to comment
https://www.bigmacktrucks.com/topic/11909-idle/#findComment-46081
Share on other sites

could be as simple as a weak spring. the throttle spring on the '77 I drove worked backwards from what you would think-if it broke, which mine did twice, it would run wide open. I put a rubber strap on it along with the spring, just for extra "insurance" in case the spring decided to break again in a bad spot, like coming down the mountain with a load of chips.

Producer of poorly photo-chopped pictures since 1999.

Link to comment
https://www.bigmacktrucks.com/topic/11909-idle/#findComment-46083
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...