bumpytruck Posted April 16, 2010 Share Posted April 16, 2010 (edited) I just finished putting a E-6 300 into my DM.The motor was used and has not ran in about a year.I have fuel up to the IP but I think I have air in the lines from the pump to the injectors.If you beleive that this is my problem,can I just crank the motor till its out and it starts or do I have to crack the lines loose at the motor? My batteries are low and on a charge now,but I did have it cranking pretty good for about 2 min total letting the starter cool off in between attemps.Any help would be great Thanks in advance! Its a 2 valve mech. pump Edited April 16, 2010 by bumpytruck Quote Link to comment https://www.bigmacktrucks.com/topic/13476-e-6-wont-start/ Share on other sites More sharing options...
hatcity Posted April 16, 2010 Share Posted April 16, 2010 Crack #1 line. No manual pump? Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/13476-e-6-wont-start/#findComment-53199 Share on other sites More sharing options...
bumpytruck Posted April 17, 2010 Author Share Posted April 17, 2010 Crack #1 line. No manual pump?There is a manual pump but I thought that only gets fuel from the tank to the pump.I have it running! Thanks Quote Link to comment https://www.bigmacktrucks.com/topic/13476-e-6-wont-start/#findComment-53217 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.