Packer Posted May 24, 2010 Share Posted May 24, 2010 Just met what will be the president of the Wyoming chapter of ATHS!His name is Mike Osborne and he is looking for a 711 engine for his 'B' project truck.Are they out there?And are they close?Or not so close!!!! laffinBe good if he could round one up and I thought I would check out the BMT site for him.I'll see him next week-end and it would be good to have some info to make him smile!!!He is driving a Mack Super as his daily driver hauling drilling supplies.And it looks GOOD!!!!Got the V-8 at near 800 horse I was told and the man is most pleased with his Mack.And well should he!Wish I had my camera so I could post a picture!I'll get one next week-end and get it posted ASAP.Packer Quote Keep a clutchin' Link to comment https://www.bigmacktrucks.com/topic/14029-wanted-711-engine/ Share on other sites More sharing options...
randyjinla Posted May 25, 2010 Share Posted May 25, 2010 I know of one, but its in lower Alabama, on the gulf coast. If he cann't find one closer than that let me know and i can get more info more you. Quote Link to comment https://www.bigmacktrucks.com/topic/14029-wanted-711-engine/#findComment-55730 Share on other sites More sharing options...
Packer Posted May 25, 2010 Author Share Posted May 25, 2010 I know of one, but its in lower Alabama, on the gulf coast. If he cann't find one closer than that let me know and i can get more info more you.Hey thanks!!!I'm doing the leg work here to help the guy out and any help is great!!Don't know where he might be going but he really wants a 711 back in the truck.The quote was something like "That's what was in it and that's what I want to put back".Packer Quote Keep a clutchin' Link to comment https://www.bigmacktrucks.com/topic/14029-wanted-711-engine/#findComment-55734 Share on other sites More sharing options...
jake Posted May 27, 2010 Share Posted May 27, 2010 I have one for parts if you decide to build one up. It has the heads on it and the internal parts in it. It ran good in my B model but the block has an internal crack.I hate to see it go for junk if someone could use it. I'm in Wisconsin. Quote Link to comment https://www.bigmacktrucks.com/topic/14029-wanted-711-engine/#findComment-55874 Share on other sites More sharing options...
Packer Posted May 27, 2010 Author Share Posted May 27, 2010 I have one for parts if you decide to build one up. It has the heads on it and the internal parts in it. It ran good in my B model but the block has an internal crack.I hate to see it go for junk if someone could use it. I'm in Wisconsin.Just got off the phone with Mike Osborne and his engine has a crank issue.That's why he is looking for another engine.Paul Van Scott thinks he may have one also.I'll pass the info along to Mike.I'm just using the BMT forum to chase one down for him.He gets to make the big, but informed, decision.He grabs me as a BMT kinda guy, but haven't got him into the system yet.Thanks for the input!!!Packer Quote Keep a clutchin' Link to comment https://www.bigmacktrucks.com/topic/14029-wanted-711-engine/#findComment-55876 Share on other sites More sharing options...
dirtfarmer163 Posted June 20, 2010 Share Posted June 20, 2010 i might have one in the shed but i forget if its a 711 or a 673 Quote Link to comment https://www.bigmacktrucks.com/topic/14029-wanted-711-engine/#findComment-57733 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.