skip Posted July 9, 2010 Share Posted July 9, 2010 Gday everyone how are we? Ive recently plumbed up my R615 from the ground up. Its not quite the same as original, it came out with a single air tank for service applications and it had a cable operated hand brake. Ive put an extra air tank on for the emergency release system controled by a PP1 valve. Does anyone know if you can get hold of the name plate that fits under the nut on that valve? It goes through the procedure for the emergency release application. Ive also plumbed in a limiting QR1 valve for the steer axle, controled by a TW1 valve(same as a diff lock switch). Does anyone know if you can get hold of the 'Dry Road/Slippery Road name plate for the top of that valve. I know these are ridiculous requests, but I just want it to look close to original inside. Any help or info will be greatly appreciated. Thanks everyone, Skip Quote Link to comment https://www.bigmacktrucks.com/topic/14744-r600-brake-valve-name-plates/ Share on other sites More sharing options...
Rob Posted July 9, 2010 Share Posted July 9, 2010 Gday everyone how are we? Ive recently plumbed up my R615 from the ground up. Its not quite the same as original, it came out with a single air tank for service applications and it had a cable operated hand brake. Ive put an extra air tank on for the emergency release system controled by a PP1 valve. Does anyone know if you can get hold of the name plate that fits under the nut on that valve? It goes through the procedure for the emergency release application. Ive also plumbed in a limiting QR1 valve for the steer axle, controled by a TW1 valve(same as a diff lock switch). Does anyone know if you can get hold of the 'Dry Road/Slippery Road name plate for the top of that valve. I know these are ridiculous requests, but I just want it to look close to original inside. Any help or info will be greatly appreciated. Thanks everyone, SkipHi Skip, I'll be into the place I use for truck parts and they still have access to Bendix namplates. I'll have them photocopy a couple of pages and get them to you as there are many variants to the plates and mounting styles.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/14744-r600-brake-valve-name-plates/#findComment-59149 Share on other sites More sharing options...
shivam Posted July 9, 2010 Share Posted July 9, 2010 hi everyone,name plates??????????????????i heard number plates bt wats name plate???? Quote Dump Trucks | Heavy Duty Trucks Link to comment https://www.bigmacktrucks.com/topic/14744-r600-brake-valve-name-plates/#findComment-59151 Share on other sites More sharing options...
Mutt Posted July 9, 2010 Share Posted July 9, 2010 (edited) hi everyone,name plates??????????????????i heard number plates bt wats name plate????Typically they are the aluminum plates that the valve stem protrudes through. They are silk screened with funtions and sometimes directions on how to use their corresponding valves/switches. Edited July 9, 2010 by Mutt Quote Link to comment https://www.bigmacktrucks.com/topic/14744-r600-brake-valve-name-plates/#findComment-59152 Share on other sites More sharing options...
rhasler Posted July 9, 2010 Share Posted July 9, 2010 Gday everyone how are we? Ive recently plumbed up my R615 from the ground up. Its not quite the same as original, it came out with a single air tank for service applications and it had a cable operated hand brake. Ive put an extra air tank on for the emergency release system controled by a PP1 valve. Does anyone know if you can get hold of the name plate that fits under the nut on that valve? It goes through the procedure for the emergency release application. Ive also plumbed in a limiting QR1 valve for the steer axle, controled by a TW1 valve(same as a diff lock switch). Does anyone know if you can get hold of the 'Dry Road/Slippery Road name plate for the top of that valve. I know these are ridiculous requests, but I just want it to look close to original inside. Any help or info will be greatly appreciated. Thanks everyone, SkipI think Haldex Midland Part Number K145158 is exactly what you're looking for. Here is a link to the catalog page. http://www.haldex.com/en/North-America/Applications-Products/Product-categories/Brake--Suspension-Systems/Valves/Accessories/Faceplate-for-Valves/K145158 Quote "Mebbe I'm too ugly and stupid to give up!" Link to comment https://www.bigmacktrucks.com/topic/14744-r600-brake-valve-name-plates/#findComment-59154 Share on other sites More sharing options...
skip Posted July 10, 2010 Author Share Posted July 10, 2010 I think Haldex Midland Part Number K145158 is exactly what you're looking for. Here is a link to the catalog page. http://www.haldex.com/en/North-America/Applications-Products/Product-categories/Brake--Suspension-Systems/Valves/Accessories/Faceplate-for-Valves/K145158Gday. Thanks for the replies everyone, that picture is similar to what I had in mind. Ive got an old F model here with one on it but its damaged. Its a Bendix Westinghouse I think, with some black and some red text. Unfortunately there is no part number on it. I might have to go for that midland style. Quote Link to comment https://www.bigmacktrucks.com/topic/14744-r600-brake-valve-name-plates/#findComment-59181 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.