QCDriver Posted July 16, 2010 Share Posted July 16, 2010 From the looks of it, getting the fan switch out, and replacing will take awhile. Any pointers for taking center lower section apart?It's an '01 CH. There are no visible screws or bolts without taking the dash all apart. I see 4 all the way underneath back by firewall. Could anyone get a hold or diagram dash lower center disassemble?Thanks for the help. Quote Link to comment https://www.bigmacktrucks.com/topic/14869-hvac-fan-switch/ Share on other sites More sharing options...
rhasler Posted July 16, 2010 Share Posted July 16, 2010 From the looks of it, getting the fan switch out, and replacing will take awhile. Any pointers for taking center lower section apart?It's an '01 CH. There are no visible screws or bolts without taking the dash all apart. I see 4 all the way underneath back by firewall. Could anyone get a hold or diagram dash lower center disassemble?Thanks for the help.You'll need to remove the cup holder from the front of the HVAC cover, there are two hidden screws under it. On the bottom of the cover there is a small plastic locating tab that you will have to slide the cover off of to get it off.HVAC Cover.pdf Quote "Mebbe I'm too ugly and stupid to give up!" Link to comment https://www.bigmacktrucks.com/topic/14869-hvac-fan-switch/#findComment-59695 Share on other sites More sharing options...
QCDriver Posted July 17, 2010 Author Share Posted July 17, 2010 You'll need to remove the cup holder from the front of the HVAC cover, there are two hidden screws under it. On the bottom of the cover there is a small plastic locating tab that you will have to slide the cover off of to get it off.It would figure out of the 3 knobs for the system, the one that is used most, is the one with the plastic shaft. Without your diagram I would have for sure removed way too many torx screws then needed.Thank You. I'd but lost without the info you, and others have given me. Quote Link to comment https://www.bigmacktrucks.com/topic/14869-hvac-fan-switch/#findComment-59702 Share on other sites More sharing options...
QCDriver Posted July 18, 2010 Author Share Posted July 18, 2010 You'll need to remove the cup holder from the front of the HVAC cover, there are two hidden screws under it. On the bottom of the cover there is a small plastic locating tab that you will have to slide the cover off of to get it off.Well I could never figure how to remove cup holder, tried prying and pushing out the plugs in bottom of cup holder. Well now I know why they looked like plastic plugs. I scraped them and found 2 torx screws. Reason why they always looked like plugs is because that bottom part is water tight.I removed top and found out, where my coffee went. Quote Link to comment https://www.bigmacktrucks.com/topic/14869-hvac-fan-switch/#findComment-59803 Share on other sites More sharing options...
rhasler Posted July 18, 2010 Share Posted July 18, 2010 Well I could never figure how to remove cup holder, tried prying and pushing out the plugs in bottom of cup holder. Well now I know why they looked like plastic plugs. I scraped them and found 2 torx screws. Reason why they always looked like plugs is because that bottom part is water tight.I removed top and found out, where my coffee went. At least it was only coffee and you knew where it came from. As for myself, I've become accustomed to "spit cans" and their related spillage. Quote "Mebbe I'm too ugly and stupid to give up!" Link to comment https://www.bigmacktrucks.com/topic/14869-hvac-fan-switch/#findComment-59818 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.