Brake Light Turn Combo

[leversole]

In looking at the B model wiring diagram, the turn signals are separate lights...I have the Deluxe push button turn signal switch. Is there a way to wire the brake and turn signals to light one lamp? So that the signal will still flash with the brakes applied?

Thanks

[Freightrain]

Not sure how that box style signal control works? I know the the column mounted ones can be wired to flash brake lights(as that is how mine is). I'm thinking they are designed specific and can't be converted?? Seen the box style, but don't know anything about them.

[CML Service]

In looking at the B model wiring diagram, the turn signals are separate lights...I have the Deluxe push button turn signal switch. Is there a way to wire the brake and turn signals to light one lamp? So that the signal will still flash with the brakes applied?

Thanks

The dash mount switch can be supplied as a four wire or seven wire unit. The seven wire unit is what you need to combine the rear signals and brakelights. Usually the four wire switch can be converted to the seven wire switch with some careful soldering.

PS didn't forget about brake info for you. Just too many things going on to get to everthing.

Chuck

[leversole]

Thanks, I did some research and found Truck-Lite now manufactures the old Signal-stat switches, I have a chrome seven wire coming my way...

[Greg Rider]

The 7 wire is correct if you want the rear brake lights to flash during turns.