leversole Posted November 14, 2010 Share Posted November 14, 2010 All of my the mounts for the brake actuators appears bent, with the rear of the actuator toward the brake drum, are these bent or are they made that way? Quote Link to comment https://www.bigmacktrucks.com/topic/16501-bent-brake-mount/ Share on other sites More sharing options...
Underdog Posted November 15, 2010 Share Posted November 15, 2010 I am not quite sure I follow what you are looking at, the mounting brackets look fine. The only issues I can see in the pics are some slop between the slack adjuster and camshaft, as it does not appear to be riding square. Also the shoes overlapping the drums would be DOT bait indicating the wrong shoes or drums were fitted, or perhaps loose wheel bearings. Quote Link to comment https://www.bigmacktrucks.com/topic/16501-bent-brake-mount/#findComment-66890 Share on other sites More sharing options...
snorky36 Posted November 22, 2010 Share Posted November 22, 2010 I think your brake spider might be bent where the anchor pin goes through. This this hapins when the pin is froze in the spider and someone drives it out Quote Link to comment https://www.bigmacktrucks.com/topic/16501-bent-brake-mount/#findComment-67153 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.