Zippy63 Posted May 13, 2011 Share Posted May 13, 2011 I have a chu613 mp8 2011, the pilot says to to park and perform regen. It won't regen with the switch. used vcads to to check for codes- no codes. Tried doing a manual regen an soot level is at 25%.perform regen and it came down to 1% and the smart switch still flashes with same message. Is there a campaign that fixes the problem or am I overlooking something. Any advise Quote Link to comment https://www.bigmacktrucks.com/topic/19072-regen-light/ Share on other sites More sharing options...
Mackpro Posted May 14, 2011 Share Posted May 14, 2011 I have a chu613 mp8 2011, the pilot says to to park and perform regen. It won't regen with the switch. used vcads to to check for codes- no codes. Tried doing a manual regen an soot level is at 25%.perform regen and it came down to 1% and the smart switch still flashes with same message. Is there a campaign that fixes the problem or am I overlooking something. Any adviseSend an E-service to Mack if your a dealer. There was a new Bulletin the other day about dash clusters but I didnt open it. We have had no regen issues at all with the SCR equipped MP engines at our shop. That said , there probably is a "reprogram MID128" that they have that would fix it. Quote Link to comment https://www.bigmacktrucks.com/topic/19072-regen-light/#findComment-77792 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.