Beaverdam Posted October 29, 2016 Share Posted October 29, 2016 I am buying a parts truck soon to get the cab an doors for my truck I will look at my old doors to see if window parts can be salvaged I will let u know soon as I get my truck to my house Quote Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-350309 Share on other sites More sharing options...
Red 460 Posted October 29, 2016 Share Posted October 29, 2016 Ok that would be great if you could I am also looking for the metal interior window trim ring around the windows also and the vent windows and frame to thanks Quote Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-350314 Share on other sites More sharing options...
Vladislav Posted October 29, 2016 Share Posted October 29, 2016 Hi, I might be interested in the rears. But my need isn't the whole bogie. Just a pair of differentials, or much better just the sets of gears off it. It's not a matter of cost but shipping weight. And I don't know how easy it could be to arrange shipping to New Jersey. Further I can do it myself. Vlad Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-350318 Share on other sites More sharing options...
Red 460 Posted October 29, 2016 Share Posted October 29, 2016 Hi Vlad these drive axles are in tacked they are complete with rims and tires and turuion andtorque rods I justed unbolted from frame and rolled them out . Let me know this is a good set Quote Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-350324 Share on other sites More sharing options...
Vladislav Posted November 2, 2016 Share Posted November 2, 2016 On 30.10.2016 at 2:32 AM, Red 460 said: Hi Vlad these drive axles are in tacked they are complete with rims and tires and turuion andtorque rods I justed unbolted from frame and rolled them out . Let me know this is a good set Actually I need a pair of carriers (differentials) only. But I'm afraid if you even agree to remove them a shipping to New Jersey from where they might be shipped to me would cost a lot. Any suggestions on how difficult to send old iron to the States? Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-350706 Share on other sites More sharing options...
Red 460 Posted November 2, 2016 Share Posted November 2, 2016 I guess you can pick them up here and there is no problem because they are parts I would prefer you take the hole tandem in one piece I will send you pics Quote Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-350717 Share on other sites More sharing options...
Vladislav Posted November 4, 2016 Share Posted November 4, 2016 On 03.11.2016 at 1:28 AM, Red 460 said: I guess you can pick them up here and there is no problem because they are parts I would prefer you take the hole tandem in one piece I will send you pics From what I can see in the pictures it differs from what I need. I don't have a B-model but looking for a set of differentials for my WW2 Mack. Something faster than 9.02 the original setup. But those wouldn't fit into my axles. And it seems the gears off them either. Thank you for posting the pictures. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-350959 Share on other sites More sharing options...
Maddog13407 Posted November 5, 2016 Share Posted November 5, 2016 some L and B models had the ''elephant ears'' outside mount trunion and some had the inside trunion. seems most B421's B61LST's and B70 series had the inside mount trunion for some reason Quote Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-350989 Share on other sites More sharing options...
Vladislav Posted November 5, 2016 Share Posted November 5, 2016 (edited) 19 hours ago, Maddog13407 said: some L and B models had the ''elephant ears'' outside mount trunion and some had the inside trunion. seems most B421's B61LST's and B70 series had the inside mount trunion for some reason I have the elephant ears on my truck but that's not a matter. The axles with springs, trunnion, wheels and so on are ready and almost in the chassis. Just the diffs required to go in. The trouble is the correct bolt pattern. They are 10 bolts, the style L's and early B's had. My carriers's bodies are also ready, sand blasted and painted. The key is gear sets. I can put them off my R which I have 2 extra sets. Would get 5,73 doing that. But the power divider off a R-model (CRD-92) has a shorter body than my original one. Not nice on my mind. So I'm in a search so far. Have time so far being working with other big parts. Edited November 5, 2016 by Vladislav Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-351047 Share on other sites More sharing options...
Ceus 19766 Posted September 1, 2020 Share Posted September 1, 2020 Que pasó con este camión? Quote Link to comment https://www.bigmacktrucks.com/topic/19160-mack-b-77/page/2/#findComment-459944 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.