Rob Posted July 1, 2011 Share Posted July 1, 2011 I've been wanting one of these things for quite some time to finish and remove rust from small parts. This is a vibratory parts tumbler. Basically you load the hopper with an abrasive media, then some parts, then more media, more parts etc. till the hopper is almost full. This thing is then turned on and the vibration frequency is quite high and the parts are actually "scrubbed" clean. Depending on the media used and the abrasiveness it will actually round over corners on steel items. These are used extensively in manufacturing for obtaining surface finishes in the micron range, burr removal, polishing, etc. I primarily wanted it to clean up small fasteners and parts too small to blast effectively. These things will actually derust the inside of a pipe if you use the correct size and type of abrasive media. When finished you open the bottom of the hopper and the abrasive filters out through a screen and chute into a five gallon bucket for reuse.Pretty neat little gadget that will be well used in the shop. Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/ Share on other sites More sharing options...
tkobes43 Posted July 1, 2011 Share Posted July 1, 2011 looks pretty neat! Congrats on the purchase! Quote "Nothing Breaks Wind Like A Bulldog" Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80765 Share on other sites More sharing options...
mowerman Posted July 1, 2011 Share Posted July 1, 2011 I've been wanting one of these things for quite some time to finish and remove rust from small parts. This is a vibratory parts tumbler. Basically you load the hopper with an abrasive media, then some parts, then more media, more parts etc. till the hopper is almost full. This thing is then turned on and the vibration frequency is quite high and the parts are actually "scrubbed" clean. Depending on the media used and the abrasiveness it will actually round over corners on steel items. These are used extensively in manufacturing for obtaining surface finishes in the micron range, burr removal, polishing, etc. I primarily wanted it to clean up small fasteners and parts too small to blast effectively. These things will actually derust the inside of a pipe if you use the correct size and type of abrasive media. When finished you open the bottom of the hopper and the abrasive filters out through a screen and chute into a five gallon bucket for reuse.Pretty neat little gadget that will be well used in the shop. Roboh ill bet,,good deal,and yes shop toys are always exciting,from age 12-up.lol...bob Quote Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80767 Share on other sites More sharing options...
Rob Posted July 1, 2011 Author Share Posted July 1, 2011 oh ill bet,,good deal,and yes shop toys are always exciting,from age 12-up.lol...bobThis toy will really excite randyp. It vibrates when in use. Don't think I'll let Mike borrow it however; don't know if he could stand the ecstacy of it's use.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80769 Share on other sites More sharing options...
mowerman Posted July 1, 2011 Share Posted July 1, 2011 This toy will really excite randyp. It vibrates when in use. Don't think I'll let Mike borrow it however; don't know if he could stand the ecstacy of it's use.Robsee now thats what i call paybacks bitch!!!!lol...bob Quote Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80773 Share on other sites More sharing options...
Mike Posted July 1, 2011 Share Posted July 1, 2011 This toy will really excite randyp. It vibrates when in use. Don't think I'll let Mike borrow it however; don't know if he could stand the ecstacy of it's use.Rob LOL....After seeing it now I want it, for ya could put a truck engine in that hopper with that 300 HP motor on it. Rob always thinks BIG. HMMMMM....wonder if Rob is from TEXAS also? mike Quote Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80775 Share on other sites More sharing options...
tkobes43 Posted July 1, 2011 Share Posted July 1, 2011 Rob, i hope you dont mind me asking but who makes that machine? And whats the model of it? Im really interested in one. Very nice piece of machinery, i have a few jobs i can use it for... Thanks for your help!Tom Quote "Nothing Breaks Wind Like A Bulldog" Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80777 Share on other sites More sharing options...
Rob Posted July 1, 2011 Author Share Posted July 1, 2011 Rob, i hope you dont mind me asking but who makes that machine? And whats the model of it? Im really interested in one. Very nice piece of machinery, i have a few jobs i can use it for... Thanks for your help!TomHi Tom, I really don't know who makes this one as there is no name tag anyplace. If you look on google for vibratory tumbler, there will be several come up. These are common and in many sizes. This one is old but seems to work well and vibrates smoothly. Like I mentioned I wanted one to clean up small parts that normally take a while in a blast cabinet. This thing can run on it's own unattended.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80779 Share on other sites More sharing options...
tkobes43 Posted July 2, 2011 Share Posted July 2, 2011 Very cool! Thanks alot for the information. Ill do some research.Tom Quote "Nothing Breaks Wind Like A Bulldog" Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80787 Share on other sites More sharing options...
Rob Posted July 2, 2011 Author Share Posted July 2, 2011 LOL....After seeing it now I want it, for ya could put a truck engine in that hopper with that 300 HP motor on it. Rob always thinks BIG. HMMMMM....wonder if Rob is from TEXAS also? mike No, I'm not from Texas but I did go to high school there for almost a full year.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80788 Share on other sites More sharing options...
rhasler Posted July 2, 2011 Share Posted July 2, 2011 No, I'm not from Texas but I did go to high school there for almost a full year.RobNo...but I did stay at a Holiday Inn Express last night. Quote "Mebbe I'm too ugly and stupid to give up!" Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80791 Share on other sites More sharing options...
Rob Posted July 2, 2011 Author Share Posted July 2, 2011 No...but I did stay at a Holiday Inn Express last night.Uh oh. Plagurizing Freightrain's tag line. This can't be good LOL.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80792 Share on other sites More sharing options...
other dog Posted July 2, 2011 Share Posted July 2, 2011 Looks like you could dump 50 lbs. of chicken in it, a bag or 2 of flour, a box or 2 of duncan hines cake mix, some salt and pepper,and turn it on and bread your chicken so you can fry it up golden brown- just a thought...(Paul Van Scott)Should work for fish too.Note how I gave Paul credit for using his quote-that's the way to plagieurize (whatever) somebody! Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80832 Share on other sites More sharing options...
Rob Posted July 2, 2011 Author Share Posted July 2, 2011 Looks like you could dump 50 lbs. of chicken in it, a bag or 2 of flour, a box or 2 of duncan hines cake mix, some salt and pepper,and turn it on and bread your chicken so you can fry it up golden brown- just a thought...(Paul Van Scott)Should work for fish too.I was thinking something along the lines of foaming maranade or something like that.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80852 Share on other sites More sharing options...
hatcity Posted July 2, 2011 Share Posted July 2, 2011 Looks like you could dump 50 lbs. of chicken in it, a bag or 2 of flour, a box or 2 of duncan hines cake mix, some salt and pepper,and turn it on and bread your chicken so you can fry it up golden brown- just a thought...(Paul Van Scott)Should work for fish too.I use a small concrete mixer. "slightly used" adds some crunch to the coating. Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80858 Share on other sites More sharing options...
Greg Rider Posted July 3, 2011 Share Posted July 3, 2011 No, I'm not from Texas but I did go to high school there for almost a full year.RobWas it your 6th or 7th year of high school? LOL Quote #1 on A-model registryIf I drink because of work, why can't I drink at work? Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80992 Share on other sites More sharing options...
Rob Posted July 3, 2011 Author Share Posted July 3, 2011 Was it your 6th or 7th year of high school? LOL I was very close to the seventh year stretch when they asked me to leave.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/19596-got-me-a-new-shop-toy/#findComment-80994 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.