ThaddeusW Posted December 13, 2011 Share Posted December 13, 2011 Looks like Mack is getting an MP10 rated to 685HP Down Under. Its putting out 2300 ft-lbs! SCR without DPF allows for a lot more HP but then again that is for Euro 5 emissions. EPA2010 is actually a lot cleaner than Euro 5. There are Euro 5 engines in Europe putting out in excess of 700HP, Volvo having the highest, 750HP!http://www.macktrucks.com.au/default.aspx?pageid=5718 (Click the "NEW! View MP10 Engine Specifications For This Model – Coming Soon" link toward the bottom.)Too bad the Mack Australia web site does not have any brochures on their trucks, I would like to see what other options they offer. Quote -Thad What America needs is less bull and more Bulldog! Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/ Share on other sites More sharing options...
slpwlker Posted December 13, 2011 Share Posted December 13, 2011 I wonder what kinda strings you would have to pull to get that animal over here at 685 hp Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-93956 Share on other sites More sharing options...
Lmackattack Posted December 13, 2011 Share Posted December 13, 2011 Wonder if you could buy the aussi ECU and just plug it in? 1 Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-93966 Share on other sites More sharing options...
slpwlker Posted December 13, 2011 Share Posted December 13, 2011 idk that would be a good idea there Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-93967 Share on other sites More sharing options...
shortstack Posted December 13, 2011 Share Posted December 13, 2011 By the time I can afford one, there's no telling how much horsepower they will have-even in the U.S. Trey Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-93970 Share on other sites More sharing options...
slpwlker Posted December 13, 2011 Share Posted December 13, 2011 by the time i want to get one they will of already castrated them again like the Cummins for a year or to. I think the 600 cummins just started rolling back out again Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-93972 Share on other sites More sharing options...
GearheadGrrrl Posted December 13, 2011 Share Posted December 13, 2011 Give us the full power MP10, offer a full range of sleepers, and they'd have a competitive truck! 2 Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-93986 Share on other sites More sharing options...
slpwlker Posted December 13, 2011 Share Posted December 13, 2011 Give us the full power MP10, offer a full range of sleepers, and they'd have a competitive truck!Your right about that Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-93988 Share on other sites More sharing options...
bullhusk Posted December 16, 2011 Share Posted December 16, 2011 Give us the full power MP10, offer a full range of sleepers, and they'd have a competitive truck!You are right on the money !! what a great lookin truck it would be!!..........But...... and here I go again...... It would out sell there Volvo and Volvo sells a lot of sleeper tractors cause they can't sell heavy dumper/mixer trucks we don't want them!! they are junk!! Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-94315 Share on other sites More sharing options...
modblaster Posted December 16, 2011 Share Posted December 16, 2011 The 12.8 L MP8 engine is rated at 500 and 535 hp (373kW and 399kW) on the Trident. The model tested was rated at 535hp putting out 1920 ft lb (2603Nm) of torque.http://www.macktruck...spx?pageid=5716 Quote HIGH TORQUE INJECTORS 20% Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-94343 Share on other sites More sharing options...
EM6285 Posted December 26, 2011 Share Posted December 26, 2011 That would mean that MACK TRUCKS Australia is ready to kick CUMMINS out of the MACK product line? I hope so. Well they got to put an all MACK integrated powertrain I guess. Sure it would be nice to have that "MP10 tweak" on U.S MP-10 engines too.Wich Aussie MACK will get that 685 HP MP-10? Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95433 Share on other sites More sharing options...
superliner500 Posted December 27, 2011 Share Posted December 27, 2011 Titan and Superliner Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95591 Share on other sites More sharing options...
Register c Posted December 29, 2011 Share Posted December 29, 2011 Its a pure SCR engine, Emissions level is euro5 it will be around till EU6 which would be at least 2014685hp is Mdrive only600hp and you could get an manual gearboxSo far everyone that has driven one has been very happy.. Currently there are 5 out on the road... 1 Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95826 Share on other sites More sharing options...
shortstack Posted December 29, 2011 Share Posted December 29, 2011 I wondered about the Mdrive. I was under the impression they wouldn't put it behind a high horsepower engine but evidently they will. Trey Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95860 Share on other sites More sharing options...
slpwlker Posted December 29, 2011 Share Posted December 29, 2011 Think that would be a waste of a perfectly good truck right there Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95917 Share on other sites More sharing options...
Register c Posted December 30, 2011 Share Posted December 30, 2011 So far the drivers dont see the Mdrive as a waste of time.. it handles the road train application well, the feedback is its much better than an Eaton Ultrashift. With the MP10 the gold Bulldog will be back... Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95975 Share on other sites More sharing options...
anikaP Posted December 30, 2011 Share Posted December 30, 2011 Another nice truck was manufactured by Mahindra, an Indian business. But recently I read in the news that after they declared several years ago that they are going to deliver its small, diesel pickup to the U.S. However, it now appears that it is not going to occur. Article resource: Mahindra may not bring truck to the US after all Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95976 Share on other sites More sharing options...
hatcity Posted December 30, 2011 Share Posted December 30, 2011 Another nice truck was manufactured by Mahindra, an Indian business. But recently I read in the news that after they declared several years ago that they are going to deliver its small, diesel pickup to the U.S. However, it now appears that it is not going to occur. Article resource: Mahindra may not bring truck to the US after allThe 7-11 stores would have to expand 1 Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95979 Share on other sites More sharing options...
Olivetroad Posted December 30, 2011 Share Posted December 30, 2011 The 7-11 stores would have to expandThat is fuunneee! I just blew coffee through my nose Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-95984 Share on other sites More sharing options...
mackboy Posted January 23, 2012 Share Posted January 23, 2012 hey guys all the aussie engines are coming from hagerstown its only different software.they MP10 is only for superliners and titans.till now you can also order cummins in it gr rene Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-99314 Share on other sites More sharing options...
Lmackattack Posted January 24, 2012 Share Posted January 24, 2012 there you go... get a Vin off an aussi Rig and order that ECU. then plug into your USA truck. Would be intresting to see if that worked???? Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-99343 Share on other sites More sharing options...
Outback Posted January 26, 2012 Share Posted January 26, 2012 Hey guys, can't wait for the mp10's to start rolling off the production line here. If they're half as good as reported Mack will sell a million of them. Since cummins switched to egr we've had nothing but trouble with no alternatives available. Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-99769 Share on other sites More sharing options...
Mackpro Posted January 26, 2012 Share Posted January 26, 2012 We had a nice new MRU-613E (E=export) here the other day. Nice big MP-8 400HP with no DPF or SCR. Wish they were all like that to work on ! It was headed south to take a boat ride to Panama. Quote Link to comment https://www.bigmacktrucks.com/topic/22107-mack-australia-getting-a-685hp-mp10/#findComment-99772 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.