WANT TO BUY Looking for a original pyrometer gauge for R model Mack

[Jason N]

I was hoping to find someone with a original large style pyrometer for my 87 mack R. Must work and be the larger older style. If you have anything let me know. Thanks -Jason

[Rob]

I was hoping to find someone with a original large style pyrometer for my 87 mack R. Must work and be the larger older style. If you have anything let me know. Thanks -Jason

These were made by Hewitt. Some had the dog silkscreened to the face under the glass, some did not. Should measure about 3.125" in hole diameter if I'm remembering correctly. Currently trying "ice therapy" on my remaining brain cells to see if I can remember more trivial bullshit down the road.

I know I have a couple of those in the shop someplace that I'll look for; may be awhile however as there is a lot to go through.

Rob

[Jason N]

Yes, 3"+ that is what I am looking for. Let me know if you come across one. Also thanks for the reply on the trans, I will be getting a couple pictures in the next day or two. -Jason

[counterman6]

I have a 3" Hewitt P/N 1MT315P3. Shoot me an e-mail, I'll send you a picture.

Thanks,

Phil

phil@globaltrucktraders.com