Rob Posted January 14, 2012 Share Posted January 14, 2012 Today I went and ordered a few Mack parts/stuff to get some of these R models out of the shop. Getting tired of not being able to walk a straight line in the shop from front to back. I can hardly wait for the bill:Today's order included:Four left, and four right windshields.Six battery box assemblies, including tops, and bottoms, complete. Two of these will go on my B61 project as it had no boxes at all.Four windshield perimeter seals.Eight perimeter door gaskets.I have the glass run channel and "cat whiskers" in bulk so I'll make those when I get a bit of free time. I also picked up my "U" bolt kits, and spring eye bushing kits for the B61 so with the exception of setting the frame length and finding correct caster shims to set the pinion angle, I'm pretty well set to go forward on this project.Hopefully get something done on the B model this week now that the radar is back in operation.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/22661-gettin-tired-of-stagnating/ Share on other sites More sharing options...
HeavyGunner Posted January 14, 2012 Share Posted January 14, 2012 That oughta keep ya busy and outa momma's hair for awhile. Quote The problems we face today exist because the people who work for a living are outnumbered by the people who vote for a living.The government can only "give" someone what they first take from another. Link to comment https://www.bigmacktrucks.com/topic/22661-gettin-tired-of-stagnating/#findComment-98066 Share on other sites More sharing options...
mike69mackman Posted January 14, 2012 Share Posted January 14, 2012 Today I went and ordered a few Mack parts/stuff to get some of these R models out of the shop. Getting tired of not being able to walk a straight line in the shop from front to back. I can hardly wait for the bill:Today's order included:Four left, and four right windshields.Six battery box assemblies, including tops, and bottoms, complete. Two of these will go on my B61 project as it had no boxes at all.Four windshield perimeter seals.Eight perimeter door gaskets.I have the glass run channel and "cat whiskers" in bulk so I'll make those when I get a bit of free time. I also picked up my "U" bolt kits, and spring eye bushing kits for the B61 so with the exception of setting the frame length and finding correct caster shims to set the pinion angle, I'm pretty well set to go forward on this project.Hopefully get something done on the B model this week now that the radar is back in operation.Rob Quote Link to comment https://www.bigmacktrucks.com/topic/22661-gettin-tired-of-stagnating/#findComment-98105 Share on other sites More sharing options...
mike69mackman Posted January 14, 2012 Share Posted January 14, 2012 rob ,sounds like you got your work cut out for you with a truck load of parts Quote Link to comment https://www.bigmacktrucks.com/topic/22661-gettin-tired-of-stagnating/#findComment-98106 Share on other sites More sharing options...
leversole Posted January 14, 2012 Share Posted January 14, 2012 Rob, who did you order the battery boxes from and what'd it cost (if ya dont mind me askin!) Quote Link to comment https://www.bigmacktrucks.com/topic/22661-gettin-tired-of-stagnating/#findComment-98112 Share on other sites More sharing options...
Rob Posted January 14, 2012 Author Share Posted January 14, 2012 Rob, who did you order the battery boxes from and what'd it cost (if ya dont mind me askin!)Hi Leslie, I always use what is now Fleetpride in Peoria for aftermarket parts. The store has actually been there since 1971 and was a family owned business till the middle of last year. They are a PAI "master distributor". I don't know the cost on them yet but will be glad to tell you once I get the bill.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/22661-gettin-tired-of-stagnating/#findComment-98128 Share on other sites More sharing options...
theakerstwo Posted January 15, 2012 Share Posted January 15, 2012 I wish we had a PAI dist here. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/22661-gettin-tired-of-stagnating/#findComment-98134 Share on other sites More sharing options...
Rob Posted January 15, 2012 Author Share Posted January 15, 2012 I wish we had a PAI dist here.Let me know what you need Glenn. I think it could be drop shipped to your place.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/22661-gettin-tired-of-stagnating/#findComment-98136 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.