Juice Posted January 18, 2012 Share Posted January 18, 2012 I got a e7 400 in the shop with a vibration from 800 to 1400 rpm I also get a malfunction lite only in that rpm range. Has any budy else had any thing like this. Thanks for Your time. Quote Link to comment https://www.bigmacktrucks.com/topic/22734-2001e7-400-vibration/ Share on other sites More sharing options...
Juice Posted January 21, 2012 Author Share Posted January 21, 2012 Come on guys somebody has to have. some kind of idea Quote Link to comment https://www.bigmacktrucks.com/topic/22734-2001e7-400-vibration/#findComment-99041 Share on other sites More sharing options...
Ahubbard Posted January 24, 2012 Share Posted January 24, 2012 Hey i have a 99 RD with a etech 400 also. I just got through chasing a similar vibration about a month ago. It shook the dash and steering wheel at the same rpm as your vibration (worst at 11-1200). My vibration ended up being a cracked clutch pressure plate. I took the cover off the bottom of the bell housing and looked up in there with the truck running. The shake was very noticeable in there. To verify it before pulling the tranny, I snuck my wrench up in there and unbolted the clutch from the flywheel and slid it back as far as i could, then I restarted the truck and was running without the clutch turning. This took my vibration away. So i changed the clutch. I am not sure if this is your problem, but it is something to look at. Quote Link to comment https://www.bigmacktrucks.com/topic/22734-2001e7-400-vibration/#findComment-99468 Share on other sites More sharing options...
theakerstwo Posted January 25, 2012 Share Posted January 25, 2012 A virbration and check engine light sounds like a engine miss. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/22734-2001e7-400-vibration/#findComment-99494 Share on other sites More sharing options...
Ahubbard Posted January 25, 2012 Share Posted January 25, 2012 Good point, my vibration did not throw a code. What code is it? Did you use your cruise control switch to make it flash? That is if he comes back to check the thread. Quote Link to comment https://www.bigmacktrucks.com/topic/22734-2001e7-400-vibration/#findComment-99506 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.