PG Adams Posted January 26, 2012 Share Posted January 26, 2012 Just wanted to pop over here to say hello! I'm from PG Adams, Inc and we fabricate custom truck frames. Some of you may have used us in the past....*I'm looking at you, Rob! Thanks for all the nice things you had to say!*I look forward to lurking about the forums and inputing anything helpful when I can. Antique trucks hold a special place in our hearts, and we'd love to have our hand in any restorations projects you might have going on. That said, if people do have specific questions about our frames, please let me know!We'll be at the Mid-America Trucking Show in Louisville, KY at the end of March as well as the Antique Truck Historical Society's convention in Springfield, MA this May/June. Hope to see some of you there Quote Taja HallFrame Sales ManagerP.G. Adams, Inc.http://www.pgadams.com Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/ Share on other sites More sharing options...
Rob Posted January 26, 2012 Share Posted January 26, 2012 Me and my mouth again; I could prolly be vice president......... Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99761 Share on other sites More sharing options...
randyp Posted January 26, 2012 Share Posted January 26, 2012 Me and my mouth again; I could prolly be vice president.........RobI doubt it, prolly a "Monica Lewinsky" lurking in your past somewhere, just waiting to surface,,,heh heh,,,,randyp Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99763 Share on other sites More sharing options...
Rob Posted January 26, 2012 Share Posted January 26, 2012 I doubt it, prolly a "Monica Lewinsky" lurking in your past somewhere, just waiting to surface,,,heh heh,,,,randypI've never liked cigars. The "other" ehhh, it's all good.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99765 Share on other sites More sharing options...
slpwlker Posted January 26, 2012 Share Posted January 26, 2012 Welcome to the jungle Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99768 Share on other sites More sharing options...
PG Adams Posted January 26, 2012 Author Share Posted January 26, 2012 Welcome to the jungleThanks, slpwlker! Quote Taja HallFrame Sales ManagerP.G. Adams, Inc.http://www.pgadams.com Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99774 Share on other sites More sharing options...
fxfymn Posted January 26, 2012 Share Posted January 26, 2012 Welcome. It might be money well spent to advertise here and Watts is always looking for the support to keep this going. Quote Money, sex, and fire; everybody thinks everyone else is getting more than they are! Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99775 Share on other sites More sharing options...
ltl56 Posted January 26, 2012 Share Posted January 26, 2012 I bought a pair of frame rails from you guys a couple of years ago for a project. Customer service was great and the rails were dead on. Price was great too. If I recall, I ordered them on a Friday and they were delivered the following Wednesday. See you in Springfield. Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99781 Share on other sites More sharing options...
Olivetroad Posted January 26, 2012 Share Posted January 26, 2012 Me and my mouth again; I could prolly be vice president.........RobRob - The Dan Quayle of trucks - he can shift a two stick transmission, but he can't spell potato(e?) 1 Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99783 Share on other sites More sharing options...
Olivetroad Posted January 26, 2012 Share Posted January 26, 2012 Just wanted to pop over here to say hello! I'm from PG Adams, Inc and we fabricate custom truck frames. Some of you may have used us in the past....*I'm looking at you, Rob! Thanks for all the nice things you had to say!*I look forward to lurking about the forums and inputing anything helpful when I can. Antique trucks hold a special place in our hearts, and we'd love to have our hand in any restorations projects you might have going on. That said, if people do have specific questions about our frames, please let me know!We'll be at the Mid-America Trucking Show in Louisville, KY at the end of March as well as the Antique Truck Historical Society's convention in Springfield, MA this May/June. Hope to see some of you there Photos earn extra points in the cool department - Can you post a pic of the press you shape the frame rails with? Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99784 Share on other sites More sharing options...
Rob Posted January 26, 2012 Share Posted January 26, 2012 Rob - The Dan Quayle of trucks - he can shift a two stick transmission, but he can't spell potato(e?)Has an "a" on the end don't it???Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99792 Share on other sites More sharing options...
vision386 Posted January 27, 2012 Share Posted January 27, 2012 Welcome aboard! have been reading up on your company/products,seems you guys have your proverbial "shit together" good quality American made product,built by American hands! and its always nice to see a vendor actively participate/help support the old truck hobby! i do have a quick question reguarding frame rails,is the rear "taper" or ramp something you can accomplish?..........................................Mark Quote Mack Truck literate. Computer illiterate. Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99812 Share on other sites More sharing options...
Olivetroad Posted January 27, 2012 Share Posted January 27, 2012 Has an "a" on the end don't it???RobNo - not an "A", it has a "R", as in tater. A few years ago, I was loading groceries in the van and a older gentleman with a beard down to his knees and no teeth came up and said: "Sonny, you forgot your taters" as he pointed to the forgotten bag on the bottom shelf of the cart. One of the kids fell out of the van he got to laughing so hard. My wife is still livid as now all the kids turn into a barrel of monkeys and say that line whenever potatoes are mentioned. Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99819 Share on other sites More sharing options...
PG Adams Posted January 27, 2012 Author Share Posted January 27, 2012 Photos earn extra points in the cool department - Can you post a pic of the press you shape the frame rails with?How's that Olivetroad?Welcome aboard! have been reading up on your company/products,seems you guys have your proverbial "shit together" good quality American made product,built by American hands! and its always nice to see a vendor actively participate/help support the old truck hobby! i do have a quick question reguarding frame rails,is the rear "taper" or ramp something you can accomplish?..........................................MarkThanks for the welcome! We are very proud of our product As to your question, we can certainly do that rear taper/ramp. We would just need you to give us the length that the taper occurs for, and what size the web tapers down to at the very end. Let me know if you want to talk more about this and/or get pricing. Here's a photo to illustrate:I bought a pair of frame rails from you guys a couple of years ago for a project. Customer service was great and the rails were dead on. Price was great too. If I recall, I ordered them on a Friday and they were delivered the following Wednesday. See you in Springfield.Glad to hear everything worked out well for you, ltl56! See you in the Spring! Quote Taja HallFrame Sales ManagerP.G. Adams, Inc.http://www.pgadams.com Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99869 Share on other sites More sharing options...
Rob Posted January 27, 2012 Share Posted January 27, 2012 Sure is nice to not see "non US residents" running that press brake.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99874 Share on other sites More sharing options...
Olivetroad Posted January 28, 2012 Share Posted January 28, 2012 How's that Olivetroad?That is what I am talkin' 'bout! That imPRESSes me! I would like to PRESS the button to activate it!It looks like it really applies the PRESSure!That is such a good photo, I must go sit down and decomPRESS! Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-99957 Share on other sites More sharing options...
Mike Posted January 29, 2012 Share Posted January 29, 2012 Yea that is very impressive. I'm very happy to know that Americans are not forgotten by a Company like P. G. Adams Inc.Keep up the good work!mike Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-100129 Share on other sites More sharing options...
PG Adams Posted January 30, 2012 Author Share Posted January 30, 2012 (edited) That is what I am talkin' 'bout!That imPRESSes me!I would like to PRESS the button to activate it!It looks like it really applies the PRESSure!That is such a good photo, I must go sit down and decomPRESS!LOL. Glad you liked it!Yea that is very impressive. I'm very happy to know that Americans are not forgotten by a Company like P. G. Adams Inc.Keep up the good work!mikeThanks, Mike! Edited January 30, 2012 by PG Adams Quote Taja HallFrame Sales ManagerP.G. Adams, Inc.http://www.pgadams.com Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-100395 Share on other sites More sharing options...
leversole Posted January 30, 2012 Share Posted January 30, 2012 That is f'ing cool!!!! Quote Link to comment https://www.bigmacktrucks.com/topic/22883-greetings/#findComment-100416 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.