ThaddeusW Posted January 29, 2012 Share Posted January 29, 2012 Been doing a little work on the B this weekend and the hand throttle cable is broken where it meets the throttle linkage. Can I just replace the cable or do I need to replace the entire setup? And where do I get the parts necessary, checked the Watts store and maybe I missed it but I did not see it. Quote -Thad What America needs is less bull and more Bulldog! Link to comment https://www.bigmacktrucks.com/topic/22941-hand-throttle-cable-broke/ Share on other sites More sharing options...
leversole Posted January 30, 2012 Share Posted January 30, 2012 I was going to use a mixture cable from Aircraft Spruce (it kinda looks like the same setup on an R or RW), then I was going to try to repair mine, as the handle has a hole and another hole, looks like you could push the correct size inner cable through, then bend a 90 through the second hole...would have had to figure a way to get the outer cable housing to stay on the handle housing, looks like you could rig some sort of clamp...BUT THEN, I found a good one in a scrap yard! Once you get your apart, you will se what I am talking about Quote Link to comment https://www.bigmacktrucks.com/topic/22941-hand-throttle-cable-broke/#findComment-100336 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.