alcoon61 Posted February 3, 2012 Share Posted February 3, 2012 I have some slack in the bushings on the stabilizer/sway bars on the rear axles. (Not sure if that is the correct name.) Nothing wrong with the bars just bushings are worn out. I am getting some chine walk and wobble/sway when bobtail and not so bad but some when hooked to the trailer. Is there a way or place just to have them rebuilt? Prices for new bars just to replace the bushings are unreasonablly high for this struggling owner/op.Any complications that I should be aware of if I attempt to change them myself? Quote Link to comment https://www.bigmacktrucks.com/topic/23055-rear-end-stabilizer-bars-on-cxn-613-vision/ Share on other sites More sharing options...
hatcity Posted February 3, 2012 Share Posted February 3, 2012 Prolly be more expensive to rebush vs a whole new one.Easy replacement. 4 bolts is all thats on mine.Get in place, line up all bolts and tighten good. Done. Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/23055-rear-end-stabilizer-bars-on-cxn-613-vision/#findComment-100876 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.