thomastractorsvc Posted March 28, 2012 Share Posted March 28, 2012 Looking for some B Model parts or interchangepassenger seat frame (single seat) with cushions but not required (contour cab)glove box doorwindshield gasket/molding (usable condition)rear window gasket/molding (usable condition)data plate for 670 5+2 transmissiondoor glass felt & channels (usable condition)Shutter actuator or repair kit (seal dry rotted)Wanting to purchase ASAP if reasonable pricedThanksRob Thomas Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/ Share on other sites More sharing options...
Brian Blaylock Posted March 28, 2012 Share Posted March 28, 2012 I don't know if it is what you are looking for but I have a trd 67 I would sell Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110652 Share on other sites More sharing options...
Jamied625 Posted March 28, 2012 Share Posted March 28, 2012 i have the seat and glove box door but im a little far from you haha Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110653 Share on other sites More sharing options...
fauthpk Posted March 28, 2012 Share Posted March 28, 2012 Check out king of salvage.Call Kevin all. 607-652-7704. Watt's Mack B model store. Last but not least- ebay Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110654 Share on other sites More sharing options...
thomastractorsvc Posted March 28, 2012 Author Share Posted March 28, 2012 BrianThe build sheet says TRD 67 and the sales brochure calls it a TRD 670, I figured it was a factory abbreviation. I am sure it is the right one.Jamie USPS for the glove box door and my Dad is driving out from Maine in about three weeks, that seat would fit nice in his truck. Just because I live in the "Show Me" don't me I aint a Damn Yankee!, I retired from the Army at Fort "Lost in the Woods" and I not been able to find my way back east. Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110656 Share on other sites More sharing options...
thomastractorsvc Posted March 28, 2012 Author Share Posted March 28, 2012 B20Mack,I found most of the trim I needed on ebay, I spoke with the King and he has a bench seat seat which I have since found won't fit (contour cab) and he did not have the glove box. I am trying to hold out on windshield and back glass gasket/molding I think it is very expensive for what it is. I plan on stopping by LMC here in KC and bringing samples of the gaskets and window felt trim I will post what I find. My experience with older equipment is most pieces of that era were dimensionally pretty standardized. I may have to buy some expensive stuff but I am sure I can get some interchange. Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110658 Share on other sites More sharing options...
Superdog Posted March 28, 2012 Share Posted March 28, 2012 I can get you a seat and glove box door and a standard 10 speed Duplex data plate if that would work,I'd go new with the windshield rubber,the side window channel and felt you can get thru any Mack dealer,just get it for a R model and trim it to fit.The rear window rubber for a concave cab might be tough to find. Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110661 Share on other sites More sharing options...
thomastractorsvc Posted March 28, 2012 Author Share Posted March 28, 2012 SuperdogI sent you a PM.Thanks Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110704 Share on other sites More sharing options...
Jamied625 Posted March 28, 2012 Share Posted March 28, 2012 ok well let me know if you want me to ship it off Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110717 Share on other sites More sharing options...
Rob Posted March 28, 2012 Share Posted March 28, 2012 BrianThe build sheet says TRD 67 and the sales brochure calls it a TRD 670, I figured it was a factory abbreviation. I am sure it is the right one.JamieUSPS for the glove box door and my Dad is driving out from Maine in about three weeks, that seat would fit nice in his truck. Just because I live in the "Show Me" don't me I aint a Damn Yankee!, I retired from the Army at Fort "Lost in the Woods" and I not been able to find my way back east.The TRD-67 is a direct in high gear transmission. The TRD-670 is an overdrive transmission.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110720 Share on other sites More sharing options...
thomastractorsvc Posted March 28, 2012 Author Share Posted March 28, 2012 Rob so the "0" is for overdrive? The TRD 67 is what I have since that is what is on the build sheet, I wonder why on the Mack brochure that transmission was not listed, is it more common in other variations than the B61 so it was more of a custom option? Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110722 Share on other sites More sharing options...
Rob Posted March 28, 2012 Share Posted March 28, 2012 Rob so the "0" is for overdrive? The TRD 67 is what I have since that is what is on the build sheet, I wonder why on the Mack brochure that transmission was not listed, is it more common in other variations than the B61 so it was more of a custom option?Yes the "0" is for overdrive. It was a common transmission all across the board in Mack trucks of that timeframe. I'm surprised your truck does not have a TRD-72 series as I've only seen the TRD-67 series behind gasoline engines as it is smaller.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110723 Share on other sites More sharing options...
Brian Blaylock Posted March 28, 2012 Share Posted March 28, 2012 Rob the TRD 67 that I have came from behind a 673p from the factory I took it out and put a TR 720 in its place Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110742 Share on other sites More sharing options...
thomastractorsvc Posted March 28, 2012 Author Share Posted March 28, 2012 BrianI am just looking for the data plate not a transmission at this time. Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110743 Share on other sites More sharing options...
Brian Blaylock Posted March 28, 2012 Share Posted March 28, 2012 Ok I still have the plate also Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110745 Share on other sites More sharing options...
thomastractorsvc Posted March 28, 2012 Author Share Posted March 28, 2012 BrianSent a PM Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110749 Share on other sites More sharing options...
Brian Blaylock Posted March 29, 2012 Share Posted March 29, 2012 Rob I returned your PM Brian Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-110813 Share on other sites More sharing options...
Maddog13407 Posted March 30, 2012 Share Posted March 30, 2012 seen a few 67 serious transmissions in B61's behind 673 and was confused also. i know they were in b60, B62's and B68's for weight but thought they were only behind the diesels in B43's and B47's. Matt Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-111008 Share on other sites More sharing options...
theakerstwo Posted March 30, 2012 Share Posted March 30, 2012 I think i remenber seeing them in B models that had the END 465 and 475 engine in them. I remenber them because they were mixers with wedge brakes.Mixers years ago was washed with acid and then back off in a pond of water to clean the bottom off.So they never had brakes. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-111012 Share on other sites More sharing options...
JumperAndSon Posted March 30, 2012 Share Posted March 30, 2012 I think i remenber seeing them in B models that had the END 465 and 475 engine in them. I remenber them because they were mixers with wedge brakes.Mixers years ago was washed with acid and then back off in a pond of water to clean the bottom off.So they never had brakes.Really? I asked Don at the Mack Museum, and he said that Mack did not use any Scania stuff at all untill the 70's. Our B60 has an END-475 but I think it was repowered. It has the TRD-67 in it. Maybe those mixers were B60's that were repowerd the same way ours was. For some reason the build records for B60T 3908 are missing from the museum.Ben Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-111017 Share on other sites More sharing options...
fauthpk Posted March 30, 2012 Share Posted March 30, 2012 B20Mack,I found most of the trim I needed on ebay, I spoke with the King and he has a bench seat seat which I have since found won't fit (contour cab) and he did not have the glove box. I am trying to hold out on windshield and back glass gasket/molding I think it is very expensive for what it is. I plan on stopping by LMC here in KC and bringing samples of the gaskets and window felt trim I will post what I find. My experience with older equipment is most pieces of that era were dimensionally pretty standardized. I may have to buy some expensive stuff but I am sure I can get some interchange.Some one posted another site on here that I cannot remember. It was like Nostalgic parts or something like that. I found it in one of the threads. If I find it I will send it to you. It was all rubber parts at a reasonable price. Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-111024 Share on other sites More sharing options...
Olivetroad Posted March 30, 2012 Share Posted March 30, 2012 For some reason the build records for B60T 3908 are missing from the museum.BenWhen I read something like that, paranoia makes the hair on the back of neck stand up. I bet that truck was involved in a secret government program or sumpin.I think Jason Bourne drove it. Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-111030 Share on other sites More sharing options...
dover Posted March 30, 2012 Share Posted March 30, 2012 Some one posted another site on here that I cannot remember. It was like Nostalgic parts or something like that. I found it in one of the threads. If I find it I will send it to you. It was all rubber parts at a reasonable price.Posted 23 March 2012 - 06:37 PMhttp://diamondtrubber.com/photos.htmlWas this it?Ben Quote 1962 B733 L cab Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-111032 Share on other sites More sharing options...
fauthpk Posted March 30, 2012 Share Posted March 30, 2012 Posted 23 March 2012 - 06:37 PMhttp://diamondtrubber.com/photos.htmlWas this it?BenThat is a good site but that's not it. It will come to me. They had everything for every vehicle known. Quote Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-111034 Share on other sites More sharing options...
Rob Posted March 30, 2012 Share Posted March 30, 2012 That is a good site but that's not it. It will come to me. They had everything for every vehicle known.restoration specialties has a lot to offer.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/24134-b-model-parts-needed/#findComment-111036 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.