leversole Posted April 1, 2012 Share Posted April 1, 2012 The other brand pobably conked out and had to go back to the shop! Quote Link to comment Share on other sites More sharing options...
umodelnut Posted April 1, 2012 Share Posted April 1, 2012 The other brand pobably conked out and had to go back to the shop! AMEN!!! Quote Link to comment Share on other sites More sharing options...
slpwlker Posted April 1, 2012 Share Posted April 1, 2012 That was at the port in Baltimore when we loaded 2 weeks ago. There was a 21 axle in front of it. KMX I think has Petes. Maybe broke down or when Was this Pic taken. No movement on Sundays and the cops stop you where you are. Quote Link to comment Share on other sites More sharing options...
mack mhe9 Posted April 1, 2012 Share Posted April 1, 2012 yea and they didnt even make it to the steep hill, its a short hill about 1/2 mile but its probly 10 percent if not alittle more. Quote Link to comment Share on other sites More sharing options...
slpwlker Posted April 1, 2012 Share Posted April 1, 2012 I can't beleive they didn't have a push truck. Probably grossing around 350 to 400k Idk unless it was hauled off with a Wrecker why it is sitting there. But Your not going to get into very many truckstops with that big bastard Quote Link to comment Share on other sites More sharing options...
bullhusk Posted April 1, 2012 Share Posted April 1, 2012 Yes, those dam Pete's!!! I think I saw a single axle sidewinder U pullin that thing!!BULLHUSK 1 Quote Link to comment Share on other sites More sharing options...
mack mhe9 Posted April 1, 2012 Share Posted April 1, 2012 i thought that push truck thing my self pasing it, for those who dont know its in the middle of nothing but straight up and down hills in PA rt 901 nothing nice for a heavy hall, Quote Link to comment Share on other sites More sharing options...
Green Dash Posted April 1, 2012 Share Posted April 1, 2012 Not to play Devil's Advocate, but I've seen loads like that dropped in some peculiar places while while driver's were laying over or waiting on permits.This one's a bit extreme though, probably right about the Mack thing. Quote Jim Link to comment Share on other sites More sharing options...
umodelnut Posted April 1, 2012 Share Posted April 1, 2012 hey BULLHUSK, you talkin about my single axle sidewinder U? It would do damn better than them petes!!! (damn is not a bad word) MACK POWER Quote Link to comment Share on other sites More sharing options...
slpwlker Posted April 1, 2012 Share Posted April 1, 2012 Usually what I've seen also is a 1 ton with a fuel tank. probably getting .3 mpg with that and need to have access. I agree seen them dropped in some of the damndest places Quote Link to comment Share on other sites More sharing options...
DCR Posted April 1, 2012 Share Posted April 1, 2012 That rig has been sitting there for about a week. Strange place to stop and certainly not much in the area. Maybe going to a local coal mine. I hope they weren't using 901 and 54 as a shortcut to I80!! Quote Denny330-550-6020A "Mack Pack" Charter Member Link to comment Share on other sites More sharing options...
slpwlker Posted April 1, 2012 Share Posted April 1, 2012 I hope Pa didn't route them that way. I forgot my routing when I was 17' wide and 154k But it was out of Balt to 81 to exit 116 Not sure the road number up to I-80 west almost 200 miles or so. Ended up on 6 I think it was. then up almost to Ny back down to 80 Got off about the 60 something yard line there is a truck stop there and ran that to just south of the Ta then south to the Plant. 300 mile trip ended up being 650 and both times 1.5 days Quote Link to comment Share on other sites More sharing options...
vision386 Posted April 1, 2012 Share Posted April 1, 2012 Yes, those dam Pete's!!! I think I saw a single axle sidewinder U pullin that thing!!BULLHUSKProlly was a Gasjob too!........................................Mark Quote Mack Truck literate. Computer illiterate. Link to comment Share on other sites More sharing options...
DCR Posted April 1, 2012 Share Posted April 1, 2012 That trailer is only a few miles off of I81 exit 116. 901 west for about 7 miles then 54 west for 21 miles and you are at I80 exit 224 Danville, PA. This is a big truck route but there are several 8 to 11percent grades. Saves about 45 minutes as opposed to taking I 81 to I 80. I passed it on Monday and Saturday of this week. Quote Denny330-550-6020A "Mack Pack" Charter Member Link to comment Share on other sites More sharing options...
Olivetroad Posted April 1, 2012 Share Posted April 1, 2012 Wonder what that whole trailer rig weighs with no load on it? Quote Link to comment Share on other sites More sharing options...
Green Dash Posted April 1, 2012 Share Posted April 1, 2012 That rig has been sitting there for about a week. Strange place to stop and certainly not much in the area. Maybe going to a local coal mine. I hope they weren't using 901 and 54 as a shortcut to I80!!I ONCE ran 445 from Madisonburg to pick up 80 at Lamar. Not one of my better judgement calls but hey, it was flat on the map. Quote Jim Link to comment Share on other sites More sharing options...
vision386 Posted April 1, 2012 Share Posted April 1, 2012 I ONCE ran 445 from Madisonburg to pick up 80 at Lamar. Not one of my better judgement calls but hey, it was flat on the map. I ran 219 out of Dubois up to Warren in a blizzzard once,not the smartest choice i ever made either!..................Mark Quote Mack Truck literate. Computer illiterate. Link to comment Share on other sites More sharing options...
mowerman Posted April 1, 2012 Share Posted April 1, 2012 i wouldnt wanna have to put tires on it..$$$$$.thats quite a setup...bob Quote Link to comment Share on other sites More sharing options...
RowdyRebel Posted April 1, 2012 Share Posted April 1, 2012 ...but hey, it was flat on the map. So was this road... ....didn't stop me from runnin' it, though. Quote When approaching a 4-way stop, the vehicle with the biggest tires has the right of way! Link to comment Share on other sites More sharing options...
slpwlker Posted April 1, 2012 Share Posted April 1, 2012 That trailer is only a few miles off of I81 exit 116. 901 west for about 7 miles then 54 west for 21 miles and you are at I80 exit 224 Danville, PA. This is a big truck route but there are several 8 to 11percent grades. Saves about 45 minutes as opposed to taking I 81 to I 80. I passed it on Monday and Saturday of this week.Thats the same route took us forever. Hell just getting off of 81 and starting down sucks. Quote Link to comment Share on other sites More sharing options...
bullhusk Posted April 1, 2012 Share Posted April 1, 2012 hey BULLHUSK, you talkin about my single axle sidewinder U? It would do damn better than them petes!!! (damn is not a bad word) MACK POWER Almost the same truck Vinny, except for the muffler bearing location.BULLHUSK Quote Link to comment Share on other sites More sharing options...
Popular Post leversole Posted April 2, 2012 Author Popular Post Share Posted April 2, 2012 Although it took me three hours for my tired old compressor to pump up all them air tanks to release the brakes, I got it up the hill and dropped it off in Milton! Had to stay in 1st low split the whole way! Could have used OtherDog on the rear steer on some of 'dem curves! 3 Quote Link to comment Share on other sites More sharing options...
vision386 Posted April 2, 2012 Share Posted April 2, 2012 Although it took me three hours for my tired old compressor to pump up all them air tanks to release the brakes, I got it up the hill and dropped it off in Milton! Had to stay in 1st low split the whole way! Could have used OtherDog on the rear steer on some of 'dem curves!I bet the shutters never even opened up!............................Mark Quote Mack Truck literate. Computer illiterate. Link to comment Share on other sites More sharing options...
leversole Posted April 2, 2012 Author Share Posted April 2, 2012 I bet the shutters never even opened up!............................MarkNope! Only got to 160 degrees! That radiator is HUGE! Quote Link to comment Share on other sites More sharing options...
umodelnut Posted April 2, 2012 Share Posted April 2, 2012 Although it took me three hours for my tired old compressor to pump up all them air tanks to release the brakes, I got it up the hill and dropped it off in Milton! Had to stay in 1st low split the whole way! Could have used OtherDog on the rear steer on some of 'dem curves!how do you guys put your own trucks in the pictures? I wish i had one with my sidewinder in it........ 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.