adewale Posted May 12, 2012 Share Posted May 12, 2012 Hi All,I have a '97 RD690 that has been giving me problem lately. The steering wheel is always stiff when making turns. We recently discovered that fluid might be leaking and this was rectified. Problem did not go away and we changed the power steering pump two days ago. But problem surfaced again earlier today. Any useful advice on this will be appreciated. Quote Link to comment https://www.bigmacktrucks.com/topic/25061-newbiee-need-advice-on-rd690-stiff-steering-wheel-problem/ Share on other sites More sharing options...
Rob Posted May 12, 2012 Share Posted May 12, 2012 Hi All,I have a '97 RD690 that has been giving me problem lately. The steering wheel is always stiff when making turns. We recently discovered that fluid might be leaking and this was rectified. Problem did not go away and we changed the power steering pump two days ago. But problem surfaced again earlier today. Any useful advice on this will be appreciated.There is a tapered roller bearing at the base of the steering column just above your knees when sitting in the seat. Ensure that is good. There is also a universal joint near the same area and need to make certain that is not binding, or tight. If hydraulic related, one would need to "Tee" into the system to check for system pressure(s).Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/25061-newbiee-need-advice-on-rd690-stiff-steering-wheel-problem/#findComment-118810 Share on other sites More sharing options...
adewale Posted May 12, 2012 Author Share Posted May 12, 2012 Thanks Rob. Will see if any of these is the issue. Quote Link to comment https://www.bigmacktrucks.com/topic/25061-newbiee-need-advice-on-rd690-stiff-steering-wheel-problem/#findComment-118883 Share on other sites More sharing options...
Frmconcrete09 Posted May 12, 2012 Share Posted May 12, 2012 We've got a rd690 that has the very same problem, thanks for the advice rob .. It's really not bad enough to hinder driving but I wouldn't think it will get any better, have to tear into it this week Quote Link to comment https://www.bigmacktrucks.com/topic/25061-newbiee-need-advice-on-rd690-stiff-steering-wheel-problem/#findComment-118892 Share on other sites More sharing options...
Mike Posted May 13, 2012 Share Posted May 13, 2012 If it is what I think it is, sometimes you can lubricate the bearing and get by. Dirt gets into every means of joints and causes all kinds of delimas. Try lubrication sometimes it will wash away the dirt and lub the area at the same time.This has had good results.mike Quote Link to comment https://www.bigmacktrucks.com/topic/25061-newbiee-need-advice-on-rd690-stiff-steering-wheel-problem/#findComment-119083 Share on other sites More sharing options...
adewale Posted May 14, 2012 Author Share Posted May 14, 2012 @ RobI am actually thousands of kilometers away from the location of the truck (sorry if i sounded am right by the truck). So I have to relay this to the individual responsible for operating the truck with the mechanic and they have to get back to me by text messages.This is the steps taken so far (prior to relaying your message to them). Four (used) steering pump have been tried. Initially the pressure rose and higher than when the when the old steering pump was in place. But this did not help. Was told the mechanic now observed that the steering box is faulty (not sure how) and that it is hot. He now thought this steering box could be the problem. Anyway I have relayed the previous recommendation to them. Will wait to see if their response will to your suggestion. Quote Link to comment https://www.bigmacktrucks.com/topic/25061-newbiee-need-advice-on-rd690-stiff-steering-wheel-problem/#findComment-119301 Share on other sites More sharing options...
adewale Posted May 14, 2012 Author Share Posted May 14, 2012 Learn that driver was still able to drive with the stiff steering wheel but it get difficult when he`s making a turn. Moreso, the ``poor`` guy has a bad arm. Got hurt in a previous truck related accident and he is extremely cautious about a potential accident happening due to this new problem. I Quote Link to comment https://www.bigmacktrucks.com/topic/25061-newbiee-need-advice-on-rd690-stiff-steering-wheel-problem/#findComment-119303 Share on other sites More sharing options...
Rob Posted May 14, 2012 Share Posted May 14, 2012 @ RobI am actually thousands of kilometers away from the location of the truck (sorry if i sounded am right by the truck). So I have to relay this to the individual responsible for operating the truck with the mechanic and they have to get back to me by text messages.This is the steps taken so far (prior to relaying your message to them). Four (used) steering pump have been tried. Initially the pressure rose and higher than when the when the old steering pump was in place. But this did not help. Was told the mechanic now observed that the steering box is faulty (not sure how) and that it is hot. He now thought this steering box could be the problem. Anyway I have relayed the previous recommendation to them. Will wait to see if their response will to your suggestion.It is quite possible the sealing "O" rings internal to the steering gear are defective and passing fluid around them. This would be a cause for "stiff" steering but only a steering gear rebuild will correct this. Also the only real way to diagnose this is to interconnect hydraulic pressure gauges in the system to ensure the system is maintaining internal pressure. With worn out sealing rings on the power piston, and control valving, or relief valves not closing, internal hydraulic pressure is reduced and steering effort to turn the wheels in increased. Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/25061-newbiee-need-advice-on-rd690-stiff-steering-wheel-problem/#findComment-119310 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.