Jump to content

Recommended Posts

Superpleasure to see the Superliners!

LTL is perfect!

Yesterday I've tryed to sand one of my front alloy wheels of the same kind and see no light at the end of a tunnel still.

Great looking!

Никогда не бывает слишком много грузовиков! leversole 11.2012

Superpleasure to see the Superliners!

LTL is perfect!

Yesterday I've tryed to sand one of my front alloy wheels of the same kind and see no light at the end of a tunnel still.

Great looking!

Vlad;

Do you have any way to mechanically spin the wheel off of the truck? This makes the task considerably easier to perform when both sanding, and polishing for sheen.

Rob

Dog.jpg.487f03da076af0150d2376dbd16843ed.jpgPlodding along with no job nor practical application for my existence, but still trying to fix what's broke.

 

 

Rob, thank you for attention.

My wheel story is too long.

At the moment I found 2 original alloys and that's all the rest of whole 40 wheels of the four R models of always the same kind imported in Russia.

That 2 wheels saw alot of mud, sand and salt on roads.

I started to send by Nr120 and continued with a sandpaper for wood.

After half an hour working the same area I see deep corrosion in the aluminium, probably near 0,5 mm or more.

Have spoken about machine cut them for 1 mm, waiting for an answer.

I begin to seriusely think about buying new wheels, maybe the pair in front for beginning.

But met the problem by this way also.

Никогда не бывает слишком много грузовиков! leversole 11.2012

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...