CML Service Posted June 9, 2007 Share Posted June 9, 2007 Hi folks, Have any of you changed windshields in a CH? It doesn't have a key strip in the gasket. Any suggestions? Do both have to be done at the same time? I've done smaller one piece ones with this type of gasket by wrapping the gasket channel with wire. But this one seems to be a bit large and awkward for this technique. Thanks for any help. Chuck Quote Link to comment https://www.bigmacktrucks.com/topic/2570-ch-windshields/ Share on other sites More sharing options...
Rob Posted June 9, 2007 Share Posted June 9, 2007 Hi folks, Have any of you changed windshields in a CH? It doesn't have a key strip in the gasket. Any suggestions? Do both have to be done at the same time? I've done smaller one piece ones with this type of gasket by wrapping the gasket channel with wire. But this one seems to be a bit large and awkward for this technique. Thanks for any help. ChuckThat's how I do it Chuck. Use a spray foaming window window cleaner for a lubricant. I don't use wire but rather a length of clothes line for the pull to fold the gasket over and into it's locking position. Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/2570-ch-windshields/#findComment-12570 Share on other sites More sharing options...
DigDug Posted June 9, 2007 Share Posted June 9, 2007 cml - I dont know how it was done. But i had my drivers side windshield replaced on a CH. So you shouldnt have to do the whole thing. doug Quote Link to comment https://www.bigmacktrucks.com/topic/2570-ch-windshields/#findComment-12573 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.